Changes
#Enter BIOS go to ADVANCED -> AMT Configuration and set "Enter Intel(R) MEBx Setup" to "Enabled"
#Exit saving changes -> System will boot ( one time ) to to MEBx AMT setup
#Enter "MEBx Login" -> using password "admin" and set the "Intel(R) ME New password " according with rules below
##At least 8 characters ( max32)
##At least one 7-bit ASCII non alpha-numeric character(e.g.'!','$',';') , but excluding ':' ,',' and '""' characters
##At least one lower case letter ('a','b'...'z') and at least one upper case letter ('A' ,'B'...'Z')
#Enter "Intel(R) AMT Standard Manageability Configuration" -> "Activate Network Access" and press "Y"
#Enter "Network Setup" -> "TCP/IP Settings" ->"Wired LAN IPV4 Configuration" -> "DHCP Mode" and set to "Disabled"
#Now set all IPs related settings and then press "ESC" four times - returning to main menu
'''Usage'''
#Connect Intel LAN 1 to the a network ( right one from the rear)
#On the remote machine:
##Open browser and set address to http://your_ip:16992 when "your_ip" was set previously in the AMT setup
