Tensor-I22 TEL Modules
From fit-PC wiki
- This page provides technical information about Tensor-I22 TEL Modules.
- TEL Moduless extend Tensor-I22 functionality and I/O.
- TEL Modules stands for TEnsor ELlement. An extension card for Tensor-I22. Multiple TELs can be installed at the same time.
- TEL Modules standard is open to allow 3rd parties to design their own application specific TEL Modules
- The full production files of each Compulab TEL Modules are published below to allow 3rd parties to modify for their needs
Tensor-I22 TEL Modules Types
TEL | Description | Image | PN in Tensor-I22 |
Input/Output TELs | |||
---|---|---|---|
TEL-SERX4 | 4x RS232 / RS485 with DB9 connectors | ![]() |
FH |
TEL-SERX1 | 1x RS232 by DB9 | ![]() |
FHA |
TEL-CANBUS | Using DB9 connector, supports CAN 2.0A Specifications and ISO 11898-2 | ![]() |
FQ |
TEL-GPIO | 20x GPIO - terminal block of 4x GPIO + 4 headers of 4 GPIO each | ![]() |
FS |
TEL-GPIOEXT | 4x GPIO by a terminal block to be used with TEL-GPIO | ![]() |
FV |
TEL-AUDIO | Headphones / line-out + microphone using 2x 3.5mm | ![]() |
A |
USB TELs | |||
TEL-USB3X4V | 4x USB3.1 type A | ![]() |
FEA |
TEL-USB2X4V | 4x USB2.0 type A | ![]() |
FEC |
Networking TELs | |||
TEL-LANX2 | 2x Gbit Ethernet ports using RJ45 | ![]() |
FC |
TEL-POEX2 | 2x Gbit Ethernet with PoE PSE 802.3at Type 1 by RJ45 | ![]() |
FU |
TEL-OPLN2 | 2 x SFP+ socket for optical GbE connection | ![]() |
FW |
Storage TELs | |||
M.2 Key-M for NVMe | Additional M.2 Key-M for NVMe card | ![]() |
FFN |
M.2 Key-M for SATA | Additional M.2 Key-M for SATA | ![]() |
FFS |
M.2 Key-M for AI module | Additional M.2 Key-M with enhanced heat dissipation for AI acceleration module | ![]() |
FFA |
TEL-SATA1 | 2x 2.5" SSD / HDD | ![]() |
FT |
Extension TELs | |||
TEL-M2B | an M.2 key-B socket with SIM card tray + 2x Pentaband antennas (each with a panel and MHF cable) | ![]() |
FI |
TEL-M2E | an M.2 key-E socket + 2x Wi-Fi antennas (each with a panel and MHF cable) | ![]() |
FJ |
TEL-MINIPCIE | a mini PCIe socket with SIM card tray + 2x Pentaband antennas (each with a panel and U.FL cable) | ![]() |
FL |
Power Modules | |||
TEL-P12 | Standard power module for 12VDC PSU with twist lock, Incl. 60W PSU and AC cord. | ![]() |
As standard with PSU PN w/o PSU |
TEL-P56 | Wide power module for 12V - 56V DC, ATX connector with locking, Incl. 120W PSU and AC cord. | ![]() |
P56 with PSU P56N w/o PSU |