Difference between revisions of "Application note - Airtop3 configure PXE boot"
From fit-PC wiki
Line 7: | Line 7: | ||
# Set the '''Network Stack setting''' to ['''Enabled'''], as a result, additional settings will appear. | # Set the '''Network Stack setting''' to ['''Enabled'''], as a result, additional settings will appear. | ||
# Enable the appropriate functionality. | # Enable the appropriate functionality. | ||
− | + | * <u>For example:</u> for Ipv4 PXE functionality, set the '''Ipv4 PXE Support''' setting to ['''Enabled''']. | |
# Press '''F4''' to save and exit. | # Press '''F4''' to save and exit. | ||
# Confirm by entering BIOS menu and checking at '''Boot''' tab that the "'''UEFI PXE'''" option appears in the boot priorities list. | # Confirm by entering BIOS menu and checking at '''Boot''' tab that the "'''UEFI PXE'''" option appears in the boot priorities list. |
Revision as of 13:34, 17 November 2019
- This application note applies to Airtop3
- It provides BIOS configurations instructions to properly configure the Airtop3 to boot from PXE environment.
Instructions
- Enter the BIOS menu by pressing "ESC" on startup.
- In the BIOS menu, browse to Advanced -> Network Stack Configuration menu.
- Set the Network Stack setting to [Enabled], as a result, additional settings will appear.
- Enable the appropriate functionality.
- For example: for Ipv4 PXE functionality, set the Ipv4 PXE Support setting to [Enabled].
- Press F4 to save and exit.
- Confirm by entering BIOS menu and checking at Boot tab that the "UEFI PXE" option appears in the boot priorities list.