Difference between revisions of "Airtop3 - AMT configuration"
From fit-PC wiki
(Created page with "* This guide instructs how to configure Intel AMT on Airtop3 '''AMT configuration''' 1. Enter BIOS menu by pressing ['''ESC'''] on startup 2. Navigate to "'''Boot'''" Tab and...") (change visibility) |
|||
Line 2: | Line 2: | ||
'''AMT configuration''' | '''AMT configuration''' | ||
− | + | # Enter BIOS menu by pressing ['''ESC'''] on startup | |
− | + | # Navigate to "'''Boot'''" Tab and set "'''Built-In UEFI shell'''" to ['''Enabled'''] | |
− | + | # Navigate to "Save & Exit" Tab, and choose Save and Exit option. | |
− | + | # right after the machine reboots, press CTRL+P at the splash screen to enter MEBx BIOS.<br> | |
− | + | # Enter AMT configuration settings, you'll be prompted to enter a password.<br> | |
− | + | # Change the default password. The default password is "admin". The new password has the comply with the following policies:<br> | |
* At least 8 characters | * At least 8 characters | ||
* At least one digit character (eg. 0, 1, … 9) | * At least one digit character (eg. 0, 1, … 9) |
Revision as of 09:22, 27 November 2019
- This guide instructs how to configure Intel AMT on Airtop3
AMT configuration
- Enter BIOS menu by pressing [ESC] on startup
- Navigate to "Boot" Tab and set "Built-In UEFI shell" to [Enabled]
- Navigate to "Save & Exit" Tab, and choose Save and Exit option.
- right after the machine reboots, press CTRL+P at the splash screen to enter MEBx BIOS.
- Enter AMT configuration settings, you'll be prompted to enter a password.
- Change the default password. The default password is "admin". The new password has the comply with the following policies:
- At least 8 characters
- At least one digit character (eg. 0, 1, … 9)
- At least one non-alpha-numeric character (e.g. !, $, ;) excluding colon, comma or quotes.
- At least one lower-case letter (a, b, c, d...)
- At least one upper case letter (A, B, C, D,...)
Optional: The AMT system uses DHCP to configure an IP Address.
- If you do not have a DHCP server you can configure a static IP within Intel AMT Configuration > Network Setup > TCP/IP Settings.
4. After completing network configuration the Web interface should be available at port 16992 (http://<IP>:16992/). Log in once to verify that it is available and properly configured.