Changes
/* Block diagram */
TEL-CANBUS provides a CANbus interface with isolation through a DB-9 connector.
* Single CAN device * Supports CAN 2.0A Specifications. * Supports ISO 11898-2 * Up too 1Mbit/s bit rate.
== Features ==
* CANbus through DB-9 Connector
=== Software ===
* Windows and Linux support
* Transient immunity: 30kV/uS.
* Isolated DC 5V power
* Ambient Operation from –40°C to 125°C85°C.
=== Configuration ===
* Two Code implementations in one device switchable by a DIP Switch.
* DIP switch for enabling/disabling on-board 120 Ohm termination
=== Open source hardware and software ===
* Complete hardware design files are available
* Complete firmware is available
* Designed for Hacking - Easily scriptable using an open[https://python-source can.readthedocs.io/en/master/ Python SW library. ToDo: firmware or software, not clear] for easy and cross-platform communication to the device
== Connection requirements ==
==Block diagram==
== Mechanical model ==