Changes
Created page with "== Creating a bootable USB Flash Device UFD for the EFI shell with the LAN Update Package:== # Connect the UFD to the workstation PC. # Format the UFD to the FAT32 file syste..."
== Creating a bootable USB Flash Device UFD for the EFI shell with the LAN Update Package:==
# Connect the UFD to the workstation PC.
# Format the UFD to the FAT32 file system.
# Download the LAN Update Package: https://fitiot.com/files/download/fitlet3/bios/tools/lan_update_package.zip (MD5: a8bfe5e74f653884c6be8093f1c2e561)
# Extract the files from the downloaded package and copy them to the prepared UFD.
# Download and copy https://fit-iot.s3.amazonaws.com/fitlet3/documents/eelog.dat and https://fitiot.s3.amazonaws.com/fitlet3/documents/flash.nsh files onto the prepared UFD. This '''eelog.dat''' contains the list of the MAC addresses and the '''flash.nsh''' script contains the commands to flash the firmware and the MAC addresses.
== Flashing the i210 LAN controllers using the prepared UFD ==
# Connect the prepared UFD to the target unit.
# Power up the unit.
# Press the F7 key during the boot until the “One Time Boot Menu” appears.
# Choose the UFD as the boot device.
# The system will boot to the EFI Shell, and after 4 seconds, the automatic script will start.
# The script will locate the storage device with LAN update package.
# Type the following command and press Enter: '''flash'''
# The LAN update application will flash both the i210 firmware and the MAC address from the list in the eelog.dat file onto all present i210 controllers:
# Turn off the unit by pressing the power button.
# Connect the UFD to the workstation PC.
# Format the UFD to the FAT32 file system.
# Download the LAN Update Package: https://fitiot.com/files/download/fitlet3/bios/tools/lan_update_package.zip (MD5: a8bfe5e74f653884c6be8093f1c2e561)
# Extract the files from the downloaded package and copy them to the prepared UFD.
# Download and copy https://fit-iot.s3.amazonaws.com/fitlet3/documents/eelog.dat and https://fitiot.s3.amazonaws.com/fitlet3/documents/flash.nsh files onto the prepared UFD. This '''eelog.dat''' contains the list of the MAC addresses and the '''flash.nsh''' script contains the commands to flash the firmware and the MAC addresses.
== Flashing the i210 LAN controllers using the prepared UFD ==
# Connect the prepared UFD to the target unit.
# Power up the unit.
# Press the F7 key during the boot until the “One Time Boot Menu” appears.
# Choose the UFD as the boot device.
# The system will boot to the EFI Shell, and after 4 seconds, the automatic script will start.
# The script will locate the storage device with LAN update package.
# Type the following command and press Enter: '''flash'''
# The LAN update application will flash both the i210 firmware and the MAC address from the list in the eelog.dat file onto all present i210 controllers:
# Turn off the unit by pressing the power button.
