Changes
Created page with "==TEL-OPLN2== * Type: '''Network''' * Config name: '''FW''' * Compulab part number: '''FT.W-OPLN2''' * Interface: '''2x PCIe''' * TRIP: '''2,3,4,5,6''' * Stacking: '''C, A (W..."
==TEL-OPLN2==
* Type: '''Network'''
* Config name: '''FW'''
* Compulab part number: '''FT.W-OPLN2'''
* Interface: '''2x PCIe'''
* TRIP: '''2,3,4,5,6'''
* Stacking: '''C, A (W30)'''
* Features: '''2x 1Gbps SFP/SFP+ transceiver'''
<br>
<!--
[[File:TEL-HA-SER.png|200px]]
-->
===Specifications===
* Supported 1Gbps SFP/SFP+ transceiver
* LEDs: LAN SFP link/activity indication:
** Right (DS1) green LED: ON - Link, Blink - Link and activity
** Left (DS2) green LED: ON - 100 Mbps link
** Left (DS2) orange LED: ON - 1000 Mbps link.
<!-- * provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
** M.2 Key-E: 2230 (usually used for WiFi & BT module) -->
* Ethernet controller: Intel I210IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
** PCIe interface: PCIe v2.1 (2.5 GT/s) x1
** Integrated Non-Volatile Memory
** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
*** Proxy: ECMA-393 and Windows logo for proxy offload
** Audio-video bridging: IEEE 1588/802.1AS precision time synchronization
*** IEEE 802.1Qav traffic shaper (with software extensions)
** Jumbo frames
** Interrupt moderation, VLAN support, IP checksum offload
** RSS and MSI-X to lower CPU utilization in multi-core systems
** Advanced cable diagnostics, auto MDI-X
** ECC – error correcting memory in packet buffers
<!--
===Instructions===
* [https://fit-iot.com/files/mechanical/TELS/TEL-SERX1/Installation-instructions/fitlet2-TEL-SERX1-installation-instructions.pdf fitlet2 TEL-SERX1 installation instructions]
-->
===Production files===
<b><u>Schematics</u></b>
*[https://fit-iot.com/files/tensor-pc/TELs/FT.W-OPLN2/FT.W-OPLN2_V1_0_Schematics_8000149000.zip TEL-OPLN2 Rev1.0 Schematic files]
<b><u>Assembly</u></b>
*[https://fit-iot.com/files/tensor-pc/TELs/FT.W-OPLN2/FT.W-OPLN2_V1_0_Assembly_drawings_8050149000.zip TEL-OPLN2 Rev1.0 Assembly files]
<b><u>Layout</u></b>
*[https://fit-iot.com/files/tensor-pc/TELs/FT.W-OPLN2/FT.W-OPLN2_V1_0_Layout_8030149000.ZIP TEL-OPLN2 Rev1.0 Layout files]
<b><u>Mechanical</u></b>
*[https://fit-iot.com/files/tensor-pc/TELs/FT.W-OPLN2/FT.W-OPLN2_V1_0_Mechanical_8010149000.zip TEL-OPLN2 Rev1.0 Mechanical - DXF]<br>
<!--
*3D 360<sup>0</sup> model
**[https://sketchfab.com/3d-models/TEL-SERX1-populated-e224f85861e3441eb42a39dd24f8fb3f TEL-SERX1 3D 360<sup>0</sup> model on Sketchfab]
-->
<br>Back to '''[[Tensor-PC TEL Modules]]'''
* Type: '''Network'''
* Config name: '''FW'''
* Compulab part number: '''FT.W-OPLN2'''
* Interface: '''2x PCIe'''
* TRIP: '''2,3,4,5,6'''
* Stacking: '''C, A (W30)'''
* Features: '''2x 1Gbps SFP/SFP+ transceiver'''
<br>
<!--
[[File:TEL-HA-SER.png|200px]]
-->
===Specifications===
* Supported 1Gbps SFP/SFP+ transceiver
* LEDs: LAN SFP link/activity indication:
** Right (DS1) green LED: ON - Link, Blink - Link and activity
** Left (DS2) green LED: ON - 100 Mbps link
** Left (DS2) orange LED: ON - 1000 Mbps link.
<!-- * provided M.2 sockets: M.2 Key-M: 2242/2260/2280 (for SATA SSD)
** M.2 Key-E: 2230 (usually used for WiFi & BT module) -->
* Ethernet controller: Intel I210IS GbE Controller, SKU: SerDes (10/100/1000 Mbps)
** PCIe interface: PCIe v2.1 (2.5 GT/s) x1
** Integrated Non-Volatile Memory
** Platform Power Efficiency: IEEE 802.3az Energy Efficient Ethernet (EEE)
*** Proxy: ECMA-393 and Windows logo for proxy offload
** Audio-video bridging: IEEE 1588/802.1AS precision time synchronization
*** IEEE 802.1Qav traffic shaper (with software extensions)
** Jumbo frames
** Interrupt moderation, VLAN support, IP checksum offload
** RSS and MSI-X to lower CPU utilization in multi-core systems
** Advanced cable diagnostics, auto MDI-X
** ECC – error correcting memory in packet buffers
<!--
===Instructions===
* [https://fit-iot.com/files/mechanical/TELS/TEL-SERX1/Installation-instructions/fitlet2-TEL-SERX1-installation-instructions.pdf fitlet2 TEL-SERX1 installation instructions]
-->
===Production files===
<b><u>Schematics</u></b>
*[https://fit-iot.com/files/tensor-pc/TELs/FT.W-OPLN2/FT.W-OPLN2_V1_0_Schematics_8000149000.zip TEL-OPLN2 Rev1.0 Schematic files]
<b><u>Assembly</u></b>
*[https://fit-iot.com/files/tensor-pc/TELs/FT.W-OPLN2/FT.W-OPLN2_V1_0_Assembly_drawings_8050149000.zip TEL-OPLN2 Rev1.0 Assembly files]
<b><u>Layout</u></b>
*[https://fit-iot.com/files/tensor-pc/TELs/FT.W-OPLN2/FT.W-OPLN2_V1_0_Layout_8030149000.ZIP TEL-OPLN2 Rev1.0 Layout files]
<b><u>Mechanical</u></b>
*[https://fit-iot.com/files/tensor-pc/TELs/FT.W-OPLN2/FT.W-OPLN2_V1_0_Mechanical_8010149000.zip TEL-OPLN2 Rev1.0 Mechanical - DXF]<br>
<!--
*3D 360<sup>0</sup> model
**[https://sketchfab.com/3d-models/TEL-SERX1-populated-e224f85861e3441eb42a39dd24f8fb3f TEL-SERX1 3D 360<sup>0</sup> model on Sketchfab]
-->
<br>Back to '''[[Tensor-PC TEL Modules]]'''
