Changes

Jump to: navigation, search

How to enable RAID on Airtop3

764 bytes added, 09:56, 9 July 2020
Created page with "* This guide instructs how to enable RAID on Airtop3 == Instructions == * Enter BIOS menu by pressing ['''DEL'''] on startup * '''On BIOS version 0.30.04 and above''': ** Nav..."
* This guide instructs how to enable RAID on Airtop3

== Instructions ==
* Enter BIOS menu by pressing ['''DEL'''] on startup
* '''On BIOS version 0.30.04 and above''':
** Navigate to "'''Quick-Settings'''" and set "'''RAID'''" to ['''Enabled''']
** Press F4 to save and exit
*'''On BIOS version 0.30.03 and below''':
** Navigate to "'''Chipset'''" -> "'''PCH-IO Configuration'''" -> "'''SATA And RST Configuration'''"
** Set "'''SATA Mode Selection'''" to ['''Intel RST'''].
** Press F4 to save and exit
* Enter the setup again by pressing ['''DEL'''] on startup
* Navigate to "'''Advanced'''" -> "'''Intel(R) Rapid Storage Technology'''"
* Configure you RAID volume by selecting "'''Create RAID Volume'''"

[[Category: Airtop3]]
[[Category: application notes]]
9
edits