Changes
Created page with "* This application note applies to Airtop3 * It provides BIOS configurations instructions to properly configure the Airtop3 to boot from PXE environment. ==Instructions== #...."
* This application note applies to Airtop3
* It provides BIOS configurations instructions to properly configure the Airtop3 to boot from PXE environment.
==Instructions==
#. Enter the BIOS menu by pressing "'''ESC'''" on startup.
#. In the BIOS menu, browse to '''Advanced''' -> '''Network Stack Configuration''' menu.
#. Set the '''Network Stack setting''' to ['''Enabled'''], as a result, additional settings will appear.
#. Enable the appropriate functionality.
##. <u>For example:</u> for Ipv4 PXE functionality, set the '''Ipv4 PXE Support''' setting to ['''Enabled'''].
#. Press '''F4''' to save and exit.
#. Confirm by entering BIOS menu and checking at '''Boot''' tab that the "'''UEFI PXE'''" option appears in the boot priorities list.
* It provides BIOS configurations instructions to properly configure the Airtop3 to boot from PXE environment.
==Instructions==
#. Enter the BIOS menu by pressing "'''ESC'''" on startup.
#. In the BIOS menu, browse to '''Advanced''' -> '''Network Stack Configuration''' menu.
#. Set the '''Network Stack setting''' to ['''Enabled'''], as a result, additional settings will appear.
#. Enable the appropriate functionality.
##. <u>For example:</u> for Ipv4 PXE functionality, set the '''Ipv4 PXE Support''' setting to ['''Enabled'''].
#. Press '''F4''' to save and exit.
#. Confirm by entering BIOS menu and checking at '''Boot''' tab that the "'''UEFI PXE'''" option appears in the boot priorities list.
