Changes

Jump to: navigation, search

IPC3 Troubleshooting

950 bytes added, 14:00, 19 April 2017
Created page with "1. IPC2 BIOS reset: *Power down the PC and unplug the power cable. *Open the service door (by screwing out one bolt) and remove it (with the storage). *Reset the BIOS by press..."
1. IPC2 BIOS reset:
*Power down the PC and unplug the power cable.
*Open the service door (by screwing out one bolt) and remove it (with the storage).
*Reset the BIOS by pressing the low profile push button SW2 for 3 seconds.
*Install back the storage with the service door.
*Plug the power and power up the PC (either auto-on or pressing power button).

<!--:: [[File:IPC2_BIOS_reset.jpg]]-->


2. Verify RAM memory modules are installed - The system will not boot without memory.

3. Try to power up without storage. Is the PC boot up?
IPC3 supports up to 7200 rpm HDD drives.

4. Power supply:
*Verify the power supply is not damaged and functions properly.
*If you have another power supply use it to eliminate and determine the failing side.
*In case you use other power supply make sure it provides uninterrupted power and stable grounding.

5. [[IPC3 BIOS Update]]

6. [http://www.fit-pc.com/web/support/rma/ RMA procedure]

[[category:IPC3]]
1,916
edits