Changes

Jump to: navigation, search

FAQ:fitlet

577 bytes added, 09:36, 11 February 2016
=== Setting fitlet power consumption limit ===
fitlet BIOS allows users to set processor's maximum power consumption limit. Power setting APU TDP option accept values between 1-25000 [mW], when default value is 4500 [mW]. Higher value means better performance, and hence higher temperature. For more refer to [[fitlet BIOS guide]].
 
=== Audible noise ===
In very rare cases a weak high frequency audible noise can be heard from computer system - <br>
“Coil whine” and piezo noise from ceramic capacitors is a documented phenomenon that cannot be 100% eliminated. It is unlikely to be as loud as the fans found in most computers, and is usually less audible than the noise emitted by hard disks.<br>
An interesting phenomenon is that this electronic noise is often reduced under load (due to less power switching/trimming). Some users apply less aggressive power management and report reduction in noise.
=== GPIO drive capabilities ===
1,916
edits