Changes
Created page with '1. fitlet BIOS reset: ::a. Power down the PC and unplug the power cable. ::b. Open the bottom cover (by unscrewing 4 bolts) and remove it. ::c. Reset the BIOS by pressing low pro...'
1. fitlet BIOS reset:
::a. Power down the PC and unplug the power cable.
::b. Open the bottom cover (by unscrewing 4 bolts) and remove it.
::c. Reset the BIOS by pressing low profile push button (SW3) for 3 seconds located near the high mini PCIe slot, as shown in the picture below.
::d. Plug the power and power up the PC.
:: [[File:Fitlet_BIOS_reset.jpg]]
2. Check the RAM memory:
:: a. Remove the top cover (refer to [http://fit-pc.com/download/fitlet/documents/fitlet-owners-manual.pdf fitlet Owner’s Manual])
:: b. Verify RAM module is installed and in place. The system will not boot without memory.
:: c. fitlet should be used with low power (1.35V) memory only.
:: d. Install the memory back.
3. Power up without storage:
:: Try to enter the BIOS by clicking ''Del'' during boot
4. Power supply:
::a. Verify the power supply is not damaged and functions properly.
::b. If you have another power supply use it to eliminate and determine the failing side.
::c. In case you use other power supply make sure it provides uninterrupted power and stable grounding.
5. [http://www.fit-pc.com/web/support/rma/ RMA procedure]
[[category:fitlet]]
::a. Power down the PC and unplug the power cable.
::b. Open the bottom cover (by unscrewing 4 bolts) and remove it.
::c. Reset the BIOS by pressing low profile push button (SW3) for 3 seconds located near the high mini PCIe slot, as shown in the picture below.
::d. Plug the power and power up the PC.
:: [[File:Fitlet_BIOS_reset.jpg]]
2. Check the RAM memory:
:: a. Remove the top cover (refer to [http://fit-pc.com/download/fitlet/documents/fitlet-owners-manual.pdf fitlet Owner’s Manual])
:: b. Verify RAM module is installed and in place. The system will not boot without memory.
:: c. fitlet should be used with low power (1.35V) memory only.
:: d. Install the memory back.
3. Power up without storage:
:: Try to enter the BIOS by clicking ''Del'' during boot
4. Power supply:
::a. Verify the power supply is not damaged and functions properly.
::b. If you have another power supply use it to eliminate and determine the failing side.
::c. In case you use other power supply make sure it provides uninterrupted power and stable grounding.
5. [http://www.fit-pc.com/web/support/rma/ RMA procedure]
[[category:fitlet]]
