798 bytes added
14:14, 31 July 2014
Created page with '1. Fit-PC2 BIOS reset: ::a. Power down the PC and unplug the power cable. ::b. Open the top cover gently and remove it (with the storage). ::c. Reset the BIOS by shorting for 3 s...'
1. Fit-PC2 BIOS reset:
::a. Power down the PC and unplug the power cable.
::b. Open the top cover gently and remove it (with the storage).
::c. Reset the BIOS by shorting for 3 seconds two test points of J4B2 located in corner (near one memory chip and power button).
::d. Close the cover and the storage with the service door.
::e. Plug the power and power up the PC.
2. Try to answer the following questions:
::a. Are you able to power up without storage?
::b. What type of storage being used in terms of RPM (in case of HDD)?
:: Note that 7200rpm drives are not recommended due to lower power nature of the PC, as such drives used to overload the machine. 5400rpm drives at maximum must be used.
3. [http://www.fit-pc.com/web/support/rma/ RMA procedure]
Newer edit →
Retrieved from "
fitlet3 FACET Cards
fitlet2 FACET Cards
Tensor-I22 TEL Modules
Tensor-I20 TEL Modules
About fit-PC wiki