Changes
Created page with "==FM-AT3 FACET Card== * Type: [[Narrow FACET Card]] * Features: ** HDA Audio codec: Realtek ALC1150 ** Dual USB 3.1 gen. 2 controller: ASMedia ASM3142 ** SD card hub Microchip..."
==FM-AT3 FACET Card==
* Type: [[Narrow FACET Card]]
* Features:
** HDA Audio codec: Realtek ALC1150
** Dual USB 3.1 gen. 2 controller: ASMedia ASM3142
** SD card hub Microchip USB2642
* Interfaces:
** 3.5mm analog mic. in
** 3.5mm analog audio out
** USB 3.1 gen. 2 on USB Type-C connector
** USB 3.1 gen. 2 on USB Type-A connector
** USB 3.1 gen. 1 on USB Type-A connector
** full-size mini PCIe
** micro-SD card slot
** LED indicators: BIOS/OS, RAM, HDMI, DP<br><!--
[[File:fc-scg-top.jpg|200px]]
[[File:fc-scg-bottom.jpg|200px|middle]]
===Instructions===
* [[Fitlet2 FC-SCG installation instructions]]
===Hardware===
* [[FSCG RS232/RS485 pinout table]]
===Application notes===
* [[Application note - CANbus on fitlet2 with FC-SCG running Linux]]
* [[Application note - GPIO on fitlet2 with FC-SCG running Linux]]
Note: GPIO Works as a GPIO extender only. Does not work as an IRQ Extender
Note: GPIO and CANbus cannot work simultaneously
===Production files===
*Schematics
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Schematics/FC-SCG-1_0-Schematics.zip FC-SCG Rev1.0 Schematic files]
*Assembly
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Assembly/FC-SCG-1_0-Assembly.zip FC-SCG Rev1.0 Assembly files]
*Layout
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Layout/FC-SCG-1_0-Layout.zip FC-SCG Rev1.0 Layout files]
Mechanical
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-CS.dxf FC-SCG Mech Component side]
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-PS.dxf FC-SCG Mech Print side]
*3D 360<sup>0</sup> model
**[https://sketchfab.com/3d-models/fc-scg-populated-4ead44de9b6c4d3a91cb6922158d99ec FC-SCG 3D 360<sup>0</sup> model on Sketchfab] -->
Back to [[Fitlet2 FACET Cards]]
[[category:fitlet2]]
[[category:Extension boards]]
* Type: [[Narrow FACET Card]]
* Features:
** HDA Audio codec: Realtek ALC1150
** Dual USB 3.1 gen. 2 controller: ASMedia ASM3142
** SD card hub Microchip USB2642
* Interfaces:
** 3.5mm analog mic. in
** 3.5mm analog audio out
** USB 3.1 gen. 2 on USB Type-C connector
** USB 3.1 gen. 2 on USB Type-A connector
** USB 3.1 gen. 1 on USB Type-A connector
** full-size mini PCIe
** micro-SD card slot
** LED indicators: BIOS/OS, RAM, HDMI, DP<br><!--
[[File:fc-scg-top.jpg|200px]]
[[File:fc-scg-bottom.jpg|200px|middle]]
===Instructions===
* [[Fitlet2 FC-SCG installation instructions]]
===Hardware===
* [[FSCG RS232/RS485 pinout table]]
===Application notes===
* [[Application note - CANbus on fitlet2 with FC-SCG running Linux]]
* [[Application note - GPIO on fitlet2 with FC-SCG running Linux]]
Note: GPIO Works as a GPIO extender only. Does not work as an IRQ Extender
Note: GPIO and CANbus cannot work simultaneously
===Production files===
*Schematics
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Schematics/FC-SCG-1_0-Schematics.zip FC-SCG Rev1.0 Schematic files]
*Assembly
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Assembly/FC-SCG-1_0-Assembly.zip FC-SCG Rev1.0 Assembly files]
*Layout
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Layout/FC-SCG-1_0-Layout.zip FC-SCG Rev1.0 Layout files]
Mechanical
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-CS.dxf FC-SCG Mech Component side]
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-PS.dxf FC-SCG Mech Print side]
*3D 360<sup>0</sup> model
**[https://sketchfab.com/3d-models/fc-scg-populated-4ead44de9b6c4d3a91cb6922158d99ec FC-SCG 3D 360<sup>0</sup> model on Sketchfab] -->
Back to [[Fitlet2 FACET Cards]]
[[category:fitlet2]]
[[category:Extension boards]]