IntensePC: Installing Android-x86 4.4 RC1

Download Android-x68 ready-to-run image

• SATA disk or USB Flash drive of at least 8GB should be used as boot media
• Download Android-x86 4.4 RC1 image

Prepare boot media on Linux

• Connect the storage device to the Linux PC
• Open Terminal window
• Run this command to figure out what device name was assigned to your storage device:

$ ls -all /dev/disk/by-id/

• Assuming your storage device was detected as /dev/sdb, write the image on it:

$ gzip -dc android-x86-4.4-rc1.8GB.dd.gz | sudo dd of=/dev/sdb bs=1MB

Welcome to Android-x86 4.4

• Connect the storage device to the Intense PC and boot
• On first boot choose language, Google account, wireless setting, etc.