Fitlet2 supported features

From fit-PC wiki
Jump to: navigation, search

The table below specifies fitlet2 current and planned support coverage. This page is updated on any significant change of support availability.

Key
Yes Support is available (when OS support is enabled)
No No support available or planned
TBD To be determined
TBS To be supported, but date is not finalized
[date] Support expected to be available on specified date
N/A Feature is not available


Feature Windows Linux
DDR3L SDRAM memory Yes Yes
M.2 SATA SSD Yes Yes
HDMI video port Yes Yes
DisplayPort video (via MiniDP) Yes Yes
Analog audio in/out Yes Yes
Digital audio out (S/PDIF) Yes Yes
LAN Yes Yes
Wireless LAN (M.2) Yes2 Yes2
Wireless Access Point (SoftAP) Yes Yes
Bluetooth Yes2 Yes2
3G/4G/LTE cellular modem Yes2 Yes2
USB 3.0 ports Yes Yes
USB 2.0 ports Yes Yes
Serial interface Yes4 Yes
Analog to Digital Conversion(ADC) TBD7 TBD7
Serial console redirection Yes Yes
SD-card R/W Yes6 Yes
mini PCIe card Yes2 Yes2
Auto-On Yes Yes
Wake-on-LAN Yes10 Yes10
Wake-on-Timer Yes Yes
Power-on-Timer Yes Yes
PXE Boot Yes1 Yes1
Watchdog TBS Yes
fTPM Yes3 Yes5
Remote power button Yes Yes
Boot from SD-card No Yes1
Boot from USB2.0 Yes8 Yes1
Boot from USB3.0 Yes8 Yes1
GPIOs No Yes2
CAN bus No Yes2
32 Bit OS No9 TBD


Notes:

1. OS capability dependent, and only in UEFI mode.
2. Requires additional module.
3. fTPM (Firmware TPM) - for more information click  Here
4. Limited functionality determined by Intel's driver support
5. Using LUKS (Linux Unified Key Setup) - see Linux:_Full_Disk_Encryption
6. Some micro-SD cards are not detected in Windows on fitlet2 - See fitlet2 microSD compatibility list
7. Requires FC-SCG FACET
8. Only “Windows To Go” version.
9. Intel Apollo Lake platform does not support 32 Bit Windows OS
10. On S1, S2, S3, and S4 states only, not on S5 (Intel Apollo Lake platform limitation)

See also