Difference between revisions of "TEL-GPIO"
From fit-PC wiki
(→WORK IN PROGRESS!!!) (change visibility) |
(→Specifications) (change visibility) |
||
Line 13: | Line 13: | ||
===Specifications=== | ===Specifications=== | ||
− | TEL-GPIO provides Isolated per UL 1577 GPIO input-output via USB CDC implementation | + | TEL-GPIO provides Isolated per [https://standardscatalog.ul.com/standards/en/standard_1577_5 UL 1577] GPIO input-output via USB CDC implementation |
*GPIOs are driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F072CB) running open source firmware that can be upgraded | *GPIOs are driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F072CB) running open source firmware that can be upgraded | ||
* 4 I/O GPIO on the device | * 4 I/O GPIO on the device | ||
* Extendable up to 20 Isolated I/O GPIO. | * Extendable up to 20 Isolated I/O GPIO. | ||
* Switch selectable GPIO power level(3.3v / 5.0v). | * Switch selectable GPIO power level(3.3v / 5.0v). | ||
− | * 2500 V rms for 1 minute per UL 1577 | + | * 2500 V rms for 1 minute per [https://standardscatalog.ul.com/standards/en/standard_1577_5 UL 1577] |
* Unidirectional Isolation block. | * Unidirectional Isolation block. | ||
* Programmable GPIO input or output. | * Programmable GPIO input or output. | ||
Line 30: | Line 30: | ||
* [https://fit-iot.com/files/mechanical/TELS/TEL-GPIO/Installation-instructions/TensorPC-TEL-GPIO-installation-instructions.pdf TensorPC TEL-GPIO installation instructions] | * [https://fit-iot.com/files/mechanical/TELS/TEL-GPIO/Installation-instructions/TensorPC-TEL-GPIO-installation-instructions.pdf TensorPC TEL-GPIO installation instructions] | ||
--> | --> | ||
+ | |||
===Production files=== | ===Production files=== | ||
Revision as of 12:07, 25 August 2021
TEL-GPIO
- Type: COM
- Config name: FS
- Interface: USB2.0
- TRIP" 2,3,4,5,6,7,7B,8,9
- Stacking: A, C
- Features: 20x GPIO - terminal block of 4x GPIO + 4 headers of 4 GPIO each
Specifications
TEL-GPIO provides Isolated per UL 1577 GPIO input-output via USB CDC implementation
- GPIOs are driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F072CB) running open source firmware that can be upgraded
- 4 I/O GPIO on the device
- Extendable up to 20 Isolated I/O GPIO.
- Switch selectable GPIO power level(3.3v / 5.0v).
- 2500 V rms for 1 minute per UL 1577
- Unidirectional Isolation block.
- Programmable GPIO input or output.
- Reprogrammable MCU FW using build-in bootloader and openly available tools.
- TEL-GPIO is Utilizing a USB2 Interface
- Multiple TEL-GPIO cards can be installed in a system. Over 100 GPIO ports can be installed
- Ambient Operation from –40°C to 85°C.
Production files
Schematics
Assembly
Layout
Mechanical
Back to Tensor-PC TEL Modules