Difference between revisions of "IPC2 Troubleshooting"
From fit-PC wiki
Line 17: | Line 17: | ||
3. Try to answer the following questions: | 3. Try to answer the following questions: | ||
::a. Are you able to power up without storage? | ::a. Are you able to power up without storage? | ||
− | ::b. | + | ::b. IPC2 supports up to 7200 rpm HDD drives. |
− | + | ||
Revision as of 08:32, 30 December 2014
1. IPC2 BIOS reset:
- a. Power down the PC and unplug the power cable.
- b. Open the service door (by screwing out one bolt) and remove it (with the storage).
- c. Reset the BIOS by pressing the low profile push button SW3 for 3 seconds.
- d. Install back the storage with the service door.
- e. Plug the power and power up the PC.
2. Verify RAM memory modules are installed -
- The system will not boot without memory.
3. Try to answer the following questions:
- a. Are you able to power up without storage?
- b. IPC2 supports up to 7200 rpm HDD drives.
4. Power supply:
- a. Verify the power supply is not damaged and functions properly.
- b. If you have another power supply use it to eliminate and determine the failing side.
- c. In case you use other power supply make sure it provides uninterrupted power and stable grounding.