Difference between revisions of "IPC2 Troubleshooting"
From fit-PC wiki
(Created page with '=== Basic troubleshooting === 1. IPC2 BIOS reset: ::a. Power down the PC and unplug the power cable. ::b. Open the service door (by screwing out one bolt) and remove it (with the...') (change visibility) |
|||
Line 1: | Line 1: | ||
− | |||
1. IPC2 BIOS reset: | 1. IPC2 BIOS reset: | ||
::a. Power down the PC and unplug the power cable. | ::a. Power down the PC and unplug the power cable. |
Revision as of 13:39, 31 July 2014
1. IPC2 BIOS reset:
- a. Power down the PC and unplug the power cable.
- b. Open the service door (by screwing out one bolt) and remove it (with the storage).
- c. Reset the BIOS by pressing the low profile push button SW3 for 3 seconds.
- d. Install back the storage with the service door.
- e. Plug the power and power up the PC
2. Try to answer the following questions:
- a. Are you able to power up without storage?
- b. What type of storage being used in terms of RPM (in case of HDD)?
- Note that 7200rpm drives are not recommended due to lower power nature of the PC, as such drives used to overload the machine. 5400rpm drives at maximum must be used.