Difference between revisions of "IPC2 Broadwell security update 170523"
From fit-PC wiki
(One intermediate revision by the same user not shown) | |||
Line 3: | Line 3: | ||
#* [http://fit-pc.com/download/intense-pc2/bios/broadwell/21-05-2017/ipc2brw_pcie_3.724.5.img.zip BIOS update for IPC2 with other FACE Modules] | #* [http://fit-pc.com/download/intense-pc2/bios/broadwell/21-05-2017/ipc2brw_pcie_3.724.5.img.zip BIOS update for IPC2 with other FACE Modules] | ||
# Extract the image file from the archive. | # Extract the image file from the archive. | ||
− | + | <!-- prepare bootable USB drive --> | |
− | + | {{How to prepare bootable USB drive}} | |
− | + | ||
− | + | ||
− | + | ||
# Boot IPC2B from the USB Flash. | # Boot IPC2B from the USB Flash. | ||
# When boots up into FreeDOS command line run: ''BIOS_UPD.bat'' and wait for it's completion without errors. | # When boots up into FreeDOS command line run: ''BIOS_UPD.bat'' and wait for it's completion without errors. |
Latest revision as of 14:04, 20 June 2017
- Download and save the attached archive:
- Extract the image file from the archive.
- Prepare bootable USB flash drive:
- Windows users - use Win32DiskImager utility: Win32DiskImager
- Linux users:
- Run this command to figure out what device name was assigned to the USB drive: $ ls -all /dev/disk/by-id/
- Assuming the USB drive was detected as /dev/sdx write the image on it by typing: $ sudo dd if=filename.img of=/dev/sdx bs=1MB
- Boot IPC2B from the USB Flash.
- When boots up into FreeDOS command line run: BIOS_UPD.bat and wait for it's completion without errors.
- After the system will boot again into FreeDOS command line run: ME_LOCK.bat and wait for it's completion without errors.
- Wait until message "Please disconnect this system from power for 15 sec for completion".
- Power cycle the computer.