Difference between revisions of "IPC2B: USB3.0 Driver Installation Guide"
From fit-PC wiki
Line 13: | Line 13: | ||
Advanced | Advanced | ||
South Bridge Configuration | South Bridge Configuration | ||
− | + | SB USB Config''' Menu. | |
set '''xHCI Mode''' to '''[Enabled]''' | set '''xHCI Mode''' to '''[Enabled]''' | ||
9. Press the '''[F10]''' key for Save&Exit | 9. Press the '''[F10]''' key for Save&Exit |
Revision as of 13:50, 15 October 2018
- This application note provides a step by step guide to install USB3.0 drivers over Windows 7.
- Applicable to IPC2-Broadwell machines.
Instructions
1. Install the Chipset driver before the USB3.0 driver 2. Download the USB3.0 driver 3. Extract the downloaded package 4. Run the OfflineSetup32.exe file for Windows 7 32bit or the OfflineSetup64.exe file for Windows 7 64bit 5. Follow the on-screen instructions 6. At the the end of installation process, reset the unit 7. Enter the BIOS menu by pressing the [F2] key during boot 8. Browse to
Advanced South Bridge Configuration SB USB Config Menu. set xHCI Mode to [Enabled]
9. Press the [F10] key for Save&Exit 10. When Windows bootd up, open the downloaded package 11. Run the Setup.exe file 12. Follow the on-screen instructions 13. At the the end of installation process, reset the unit