Difference between revisions of "Fitlet: BIOS Update"

From fit-PC wiki
Jump to: navigation, search
(Preparing the USB Flash Drive with BIOS Updater.)   (change visibility)
(Links)   (change visibility)
Line 27: Line 27:
 
# Under '''Save & Exit''' tab, select the option '''“Restore Defaults”''' and after that '''“Save Changes and Reset”'''.
 
# Under '''Save & Exit''' tab, select the option '''“Restore Defaults”''' and after that '''“Save Changes and Reset”'''.
  
== Links ==
 
 
[[category:fitlet]]
 
[[category:fitlet]]
 
[[category:BIOS]]
 
[[category:BIOS]]

Revision as of 14:37, 15 December 2015

Important Note:
Update your BIOS if system is unstable, or bug fixes provided correspond to your needs only.
Flashing the BIOS incorrectly has risk to brick your system. See to it that the guide will be followed step-by-step.


To check if you have the latest BIOS version see fitlet BIOS ROM Files and compare to BIOS Version in your fitlet.


Preparing the USB Flash Drive with BIOS Updater.

  1. Connect your USB Flash Drive to your computer and format it using FAT32.
  2. Download and extract Bios Updater package.

    The package contains the following files:

    AfuEfix64.efi
    Flash.nsh
    Shellx64.efi
  3. Copy the extracted files to the formatted USB Flash Drive.
  4. Download the BIOS binary file.
  5. Copy the flt.rom file to the root directory on the USB Flash Drive.

Updating BIOS

  1. Connect the prepared USB flash device to the fitlet and boot.
  2. Press the DEL key during boot to enter BIOS menu.
  3. Under Save & Exit tab, select the option “Launch EFI Shell from filesystem device”
  4. When the system enters the UEFI mode, type the command: flash flt and press Enter.
  5. The BIOS flashing process will start.

    Note: At the start of the process, the system will hang for 1 minute. This is expected behavior. Please, don’t interrupt it.

  6. When the process ends, type the command: reset and press Enter.
  7. Press the DEL key during the restart and enter the BIOS menu.
  8. Under Save & Exit tab, select the option “Restore Defaults” and after that “Save Changes and Reset”.