Difference between revisions of "Fitlet3 Troubleshooting - I can not turn on the computer - it does not wake up"
From fit-PC wiki
(→fitlet3 BIOS reset) (change visibility) |
(→fitlet3 BIOS reset) (change visibility) |
||
Line 20: | Line 20: | ||
Reset BIOS settings to default <!-- for [[fitlet3: Revision Notes#fitlet3 Rev 1.2 | fitlet3 revisions 1.2 and later]] -->: | Reset BIOS settings to default <!-- for [[fitlet3: Revision Notes#fitlet3 Rev 1.2 | fitlet3 revisions 1.2 and later]] -->: | ||
− | |||
− | |||
<!-- --> | <!-- --> | ||
#Unplug power cable from the fitlet3 | #Unplug power cable from the fitlet3 | ||
Line 32: | Line 30: | ||
#Press the RTC reset button. | #Press the RTC reset button. | ||
#Plug power cable (should be automatically turned on) | #Plug power cable (should be automatically turned on) | ||
+ | |||
+ | {| class="wikitable" border="1" | ||
+ | | [[File:Fitlet3 BIOS RTC.png|200px|thumb]] | ||
+ | | [[File:RTC RESET 2.png|200px|thumb]] | ||
+ | |} | ||
BIOS settings should be reset to defaults. | BIOS settings should be reset to defaults. |
Latest revision as of 09:24, 14 March 2023
I can't turn on the computer, it doesn't wake up
Possible reason: Power supply failure
Solution - Check power supply (PSU)
- Make sure the DC cable is not damaged and connected properly to the machine.
- Make sure the AC cord is properly plugged to both sides (Wall mounted well plugged).
- Trying an alternative adapter could eliminate bad PSU.
Possible reason: Memory failure
Solution - Check memory (RAM)
- Verify RAM module is seated firmly in its socket.
- Try to eliminate faulty memory sticks by swapping it with one another.
Possible reason: Peripherals failure
Solution - Check Peripherals (HDD/SSD/USB)
- Unplug peripherals and try to power up with bare minimum, that includes HDD/SSD/USB devices.
- Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction.
fitlet3 BIOS reset
Reset BIOS settings to default :
- Unplug power cable from the fitlet3
- Remove the 4x Phillips Chassis screws
- Remove bottom and top cover
- Remove the RAM stick
- Plug in power cable (should turn on automatically), and wait ~10 seconds
- Unplug power cable
- Assemble back the RAM stick
- Press the RTC reset button.
- Plug power cable (should be automatically turned on)
BIOS settings should be reset to defaults.