Difference between revisions of "FC3-SC-C2 FACET3 Card"
From fit-PC wiki
| Line 37: | Line 37: | ||
[[File:CAN-Bus DB9 Pinout.png|600px]] | [[File:CAN-Bus DB9 Pinout.png|600px]] | ||
| + | == FC3-SC Rev 1.2 Extension schematic == | ||
| + | [[File:FC3-SC Switches.png|600px]] | ||
<!-- | <!-- | ||
==Block diagram== | ==Block diagram== | ||
Revision as of 07:48, 24 October 2023
Contents
FC3-SC-2C FACET Card
Specifications
- Single CAN device using DB9 connector
- Supports CAN 2.0A Specifications and ISO 11898-2
- Bit rate of up to 1Mbit/s
- Isolation per UL 1577
- Transient immunity: 30kV/uS, isolated DC 5V power
- CANbus is driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F042C6) running open source firmware that can be upgraded
- Driverless operation in Windows
- USB native device in Linux
- Over 10 ports can be installed
- Isolated DC 5V power
- Ambient Operation from –40°C to 85°C.
Electrical and environmental
- Isolation per UL 1577
- Transient immunity: 30kV/uS.
- Isolated DC 5V power
- Ambient Operation from –40°C to 85°C.
Configuration
- Two Code implementations in one device switchable by a DIP Switch.
- Default CANable USB CDC implementation & candleLight USB device implementation.
- DIP switch for enabling/disabling on-board 120 Ohm termination
- Upgradeable using build-in MCU bootloader and openly available tools. (Please follow update guide in GitHub)
Open source hardware and software
- Complete hardware design files are available
- Complete firmware is available
- Designed for Hacking - Easily scriptable Python SW library for easy and cross-platform communication to the device
Connector Pinout
FC3-SC Rev 1.2 Extension schematic
Back to fitlet3 FACET Cards
