Difference between revisions of "Airtop3 BIOS Update"
From fit-PC wiki
Line 38: | Line 38: | ||
# The ME flashing process will start | # The ME flashing process will start | ||
# Follow on screen instructions | # Follow on screen instructions | ||
+ | |||
+ | [[category: Airtop3]] | ||
+ | [[category: software]] | ||
+ | [[Category: BIOS]] |
Revision as of 13:41, 7 January 2020
Follow us on Twitter for software and BIOS updates
- This page contains information on how to update the Airtop3 BIOS and ME file.
Contents
BIOS update
Important:
* BIOS update recommended in case the system is unstable, or required fixes have been released. * Incorrect BIOS update has a risk for system brick, therefore follow the guide step-by-step.
Preparing the USB Flash Drive with BIOS Updater
- Connect your USB Flash Drive (UFD) to your computer and format it to FAT32 file system
- Download the update package from the Airtop3 BIOS files
Updating BIOS
- Connect your USB Flash Drive (UFD) to your computer and format it to FAT32 file system
- Download and extract the update package to the UFD
- Connect the UFD to the target Airtop3 and power up
- Press the F7 key during the boot until the "Select boot device" menu appears
- Select the UFD on the menu and press ENTER
- The system will boot to EFI Shell and after 5 seconds the startup script will start (Please do not press ESC)
- The BIOS flashing process will start
- Follow on screen instructions
ME update
* ME update recommended in case the system is unstable, or required fixes have been released. * Incorrect ME update has a risk for system brick, therefore follow the guide step-by-step.
Preparing the USB Flash Drive with ME Updater
- Connect your USB Flash Drive (UFD) to your computer and format it to FAT32 file system
- Download the update package from the Airtop3 ME files
Updating Intel ME
- Connect your USB Flash Drive (UFD) to your computer and format it to FAT32 file system
- Download and extract the update package to the UFD
- Connect the UFD to the target Airtop3 and power up
- Press the F7 key during the boot until the "Select boot device" menu appears
- Select the UFD on the menu and press ENTER
- The system will boot to EFI Shell and after 5 seconds the startup script will start (Please do not press ESC)
- The ME flashing process will start
- Follow on screen instructions