Difference between revisions of "Airtop2 Troubleshooting"
From fit-PC wiki
Line 1: | Line 1: | ||
===I can't turn on the computer, it doesn't wake up?=== | ===I can't turn on the computer, it doesn't wake up?=== | ||
− | + | # '''Airtop2 BIOS reset:''' | |
− | # Power down the PC and unplug the power cable. | + | ## Power down the PC and unplug the power cable. |
− | # Open the service door. | + | ## Open the service door. |
− | # Remove the disks cartridge. | + | ## Remove the disks cartridge. |
− | # Reset the BIOS by pressing the low profile push button SW1 (RTC_RST). | + | ## Reset the BIOS by pressing the low profile push button SW1 (RTC_RST). |
− | # Mount the disks cartridge and close the door. | + | ## Mount the disks cartridge and close the door. |
− | # Plug the power and power up the PC (either auto-on or pressing power button). | + | ## Plug the power and power up the PC (either auto-on or pressing power button). |
[[File:Airtop2-bios-reset.gif]] | [[File:Airtop2-bios-reset.gif]] | ||
− | + | # '''Check memory (RAM)''' | |
Verify RAM modules are installed. The system will not boot without it. | Verify RAM modules are installed. The system will not boot without it. | ||
− | + | # '''Check storage (HDD/SSD):''' | |
Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction. | Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction. | ||
− | + | # '''Check power supply (PSU):''' | |
*Verify the power supply is not damaged and functions properly. | *Verify the power supply is not damaged and functions properly. | ||
*If you have another power supply use it to eliminate and determine the failing side. | *If you have another power supply use it to eliminate and determine the failing side. | ||
*In case you use other power supply make sure it provides uninterrupted power and stable grounding. | *In case you use other power supply make sure it provides uninterrupted power and stable grounding. |
Revision as of 15:06, 14 March 2018
I can't turn on the computer, it doesn't wake up?
- Airtop2 BIOS reset:
- Power down the PC and unplug the power cable.
- Open the service door.
- Remove the disks cartridge.
- Reset the BIOS by pressing the low profile push button SW1 (RTC_RST).
- Mount the disks cartridge and close the door.
- Plug the power and power up the PC (either auto-on or pressing power button).
- Check memory (RAM)
Verify RAM modules are installed. The system will not boot without it.
- Check storage (HDD/SSD):
Verify power up without storage. Sometimes damaged drives may cause the overall system to malfunction.
- Check power supply (PSU):
- Verify the power supply is not damaged and functions properly.
- If you have another power supply use it to eliminate and determine the failing side.
- In case you use other power supply make sure it provides uninterrupted power and stable grounding.