Fit-PC2 BIOS Update
From fit-PC wiki
To prepare bootable USB image on Windows based machine
- Download and extract bios_update.zip
- Insert thumb drive into USB socket (ensure you don't have any other USB mass storage devices connected).
- Run ImUpdate.exe
- select Target - desired disk (by letter/size).
- select Source image - 128MBDOS.img.
- Press Start Restore to proceed.
- Wait until completion - "Finished" will appear under Messages.
- Take out thumb drive and insert it again. It should now be assigned a drive letter.
- Copy to the root directory on the thumb drive files SFlash16.exe
- Copy to the root directory on the thumb drive the desired ROM file
To update BIOS
- Insert thumb drive and boot. Press F2 during boot to enter CMOS Setup Utility
- Set 1st boot priority to USB KEY
- Save and exit
fit-PC2 should boot to DOS from the thumb drive.
- Type
SFlash16.exe <ROM file name>
- Wait until completion - a message "Flash memory has been successfully programmed" should appear
- Reboot