Difference between revisions of "FC3-SC-S1C1 FACET3 Card"
From fit-PC wiki
(→CAN bus connector Pinout) (change visibility) |
|||
Line 19: | Line 19: | ||
==CAN bus and Serial connector Pinout== | ==CAN bus and Serial connector Pinout== | ||
[[File:CAN-Bus DB9 Pinout.png|600px]] | [[File:CAN-Bus DB9 Pinout.png|600px]] | ||
+ | |||
+ | == FC3-SC Rev 1.2 Extension schematic == | ||
+ | [[File:FC3-SC Switches.png|600px]] | ||
+ | |||
<!-- | <!-- | ||
===Instructions=== | ===Instructions=== |
Revision as of 07:46, 24 October 2023
Contents
FC3-SC-S1C1 FACET Card
Specifications
- DB9 with RS-232/485 + DB9 with CAN bus.
- Serial port supports RS232, RS485 half/full duplex and can be configured independently.
- CAN bus supports CAN 2.0A Specifications and ISO 11898-2
- CAN bus bit rate of up to 1Mbit/s
- CAN bus isolation per UL 1577
- CAN bus transient immunity: 30kV/uS, isolated DC 5V power
- CANbus is driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F042C6) running open source firmware that can be upgraded
- CAN bus driverless operation in Windows
- CAN bus USB native device in Linux
- CAN bus over 10 ports can be installed
- CAN bus isolated DC 5V power
- CAN bus ambient Operation from –40°C to 85°C.
CAN bus and Serial connector Pinout
FC3-SC Rev 1.2 Extension schematic
Back to fitlet3 FACET Cards