Difference between revisions of "TEL-GPIO"
From fit-PC wiki
(→Specifications) (change visibility) |
|||
| Line 13: | Line 13: | ||
===Specifications=== | ===Specifications=== | ||
| − | + | TEL-GPIO provides Isolated per UL 1577 GPIO input-output via USB CDC implementation | |
*GPIOs are driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F072CB) running open source firmware that can be upgraded | *GPIOs are driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F072CB) running open source firmware that can be upgraded | ||
| − | * | + | * 4 I/O GPIO on the device |
| − | * | + | * Extendable up to 20 Isolated I/O GPIO. |
| − | *3. | + | * Switch selectable GPIO power level(3.3v / 5.0v). |
| − | *Over 100 GPIO ports can be installed | + | * 2500 V rms for 1 minute per UL 1577 |
| + | * Unidirectional Isolation block. | ||
| + | * Programmable GPIO input or output. | ||
| + | * Reprogrammable MCU FW using build-in bootloader and openly available tools. | ||
| + | * TEL-GPIO is Utilizing a USB2 Interface | ||
| + | * Multiple TEL-GPIO cards can be installed in a system. Over 100 GPIO ports can be installed | ||
| + | * Ambient Operation from –40°C to 85°C. | ||
<!-- | <!-- | ||
===Instructions=== | ===Instructions=== | ||
* [https://fit-iot.com/files/mechanical/TELS/TEL-GPIO/Installation-instructions/TensorPC-TEL-GPIO-installation-instructions.pdf TensorPC TEL-GPIO installation instructions] | * [https://fit-iot.com/files/mechanical/TELS/TEL-GPIO/Installation-instructions/TensorPC-TEL-GPIO-installation-instructions.pdf TensorPC TEL-GPIO installation instructions] | ||
| − | + | --> | |
===Production files=== | ===Production files=== | ||
| − | + | <b><u>Schematics</u></b> | |
| − | + | *[https://fit-iot.com/files/tensor-pc/TELs/FT.S-GPIO/FT.S-GPIO_V1_1_Schematics_8000134001.zip TEL-GPIO Rev 1.1 Schematic files] | |
| − | + | <b><u>Assembly</u></b> | |
| − | + | *[https://fit-iot.com/files/tensor-pc/TELs/FT.S-GPIO/FT.S-GPIO_V1_1_Assembly_drawings_8050134001.zip TEL-GPIO Rev 1.1 Assembly files] | |
| − | + | <b><u>Layout</u></b> | |
| − | + | *[https://fit-iot.com/files/tensor-pc/TELs/FT.S-GPIO/FT.S-GPIO_V1_1_Layout_8030134001.zip TEL-GPIO Rev 1.1 Layout files] | |
| − | + | <b><u> Mechanical </u></b> | |
| − | + | * [https://fit-iot.com/files/tensor-pc/TELs/FT.S-GPIO/FT.S-GPIO_V1_1_Mechanical_8010134001.zip TEL-GPIO Mechanical - DXF]<br> | |
| − | + | ||
| − | |||
| − | |||
| − | |||
| − | |||
Back to [[Tensor-PC TEL Modules]] | Back to [[Tensor-PC TEL Modules]] | ||
Revision as of 09:00, 25 August 2021
TEL-GPIO
WORK IN PROGRESS!!!
- Type: COM
- Config name: FS
- Interface: USB2.0
- TRIP" 2,3,4,5,6,7,7B,8,9
- Stacking: A, C
- Features: 20x GPIO - terminal block of 4x GPIO + 4 headers of 4 GPIO each
Specifications
TEL-GPIO provides Isolated per UL 1577 GPIO input-output via USB CDC implementation
- GPIOs are driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F072CB) running open source firmware that can be upgraded
- 4 I/O GPIO on the device
- Extendable up to 20 Isolated I/O GPIO.
- Switch selectable GPIO power level(3.3v / 5.0v).
- 2500 V rms for 1 minute per UL 1577
- Unidirectional Isolation block.
- Programmable GPIO input or output.
- Reprogrammable MCU FW using build-in bootloader and openly available tools.
- TEL-GPIO is Utilizing a USB2 Interface
- Multiple TEL-GPIO cards can be installed in a system. Over 100 GPIO ports can be installed
- Ambient Operation from –40°C to 85°C.
Production files
Schematics
Assembly
Layout
Mechanical
Back to Tensor-PC TEL Modules
