Difference between revisions of "FC-SCG FACET Card"
From fit-PC wiki
(→Production files) (change visibility) |
|||
Line 38: | Line 38: | ||
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-CS.dxf FC-SCG Mech Component side] | **[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-CS.dxf FC-SCG Mech Component side] | ||
**[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-PS.dxf FC-SCG Mech Print side] | **[https://fit-iot.com/files/mechanical/FACETS/FC-SCG/Mechanical/FC-SCG-rev1.0-PS.dxf FC-SCG Mech Print side] | ||
+ | |||
+ | *3D 360<sup>0</sup> model | ||
+ | **[https://sketchfab.com/3d-models/fc-scg-populated-4ead44de9b6c4d3a91cb6922158d99ec FC-SCG 3D 360<sup>0</sup> model on Sketchfab] | ||
Back to [[Fitlet2 FACET Cards]] | Back to [[Fitlet2 FACET Cards]] |
Latest revision as of 06:15, 26 August 2020
Contents
FC-SCG FACET Card
- Type: Narrow FACET Card
- Features:
- CANbus
- RS232/RS485
- GPIOs
Includes the following socket:
- M.2 E-key 2230 (usually used for WiFi adapter)
Instructions
Hardware
Application notes
- Application note - CANbus on fitlet2 with FC-SCG running Linux
- Application note - GPIO on fitlet2 with FC-SCG running Linux
Note: GPIO Works as a GPIO extender only. Does not work as an IRQ Extender
Note: GPIO and CANbus cannot work simultaneously
Production files
- Schematics
- Assembly
- Layout
Mechanical
- 3D 3600 model
Back to Fitlet2 FACET Cards