Changes
/* Chipset */
=== Chipset ===
* [http://fit-pc.com/download/fitlet2/sw/drivers/win10/fitlet2_Win10_Chipset.zip Chipset driver]
** Driver version: 10.1.118010.458141** Upload date: 20172019.1007.0916
** MD5 checksum:
** HW revisions supported: All revisions
** HW revisions supported: All revisions
=== Serial IO (UART, GPIO) ===* [http://fit-pciot.com/files/download/fitlet2/sw/drivers/win10/fitlet2_Win10_SerialIO.zip Serial IO driver]** Driver version: 305.1003.16316.031843** Upload date: 20172018.0712.2504** MD5 checksum: b2e1e79beac72476136edb03aad507fa
** HW revisions supported: All revisions
** '''Installation Notes:'''
*** '''Set the following BIOS settings before driver installation:'''
**** '''Advanced -> PCI Subsystem Settings -> Above 4G Decoding : [Disabled]'''
**** '''Chipset -> North Bridge -> Above 4GB MMIO BIOS Assignment : [Disabled]'''
=== UART Sub Device (COM Ports) ===* [http://fit-pciot.com/files/download/fitlet2/sw/drivers/win10/fitlet2_Win10_HSUARTfitlet2_Win10_UART_Sub_Device.zip UART Sub Device driver]** Driver version: 123.1.35.10061844** Upload date: 20172018.0712.2504** MD5 checksum: 4185887f3ffb947cd6578a85e060a8a3
** HW revisions supported: All revisions
** '''Installation Notes:'''*** '''This driver should be installed after Install the Serial IO driver'''*** '''Intel recommends to use before the [http://www.extraputty.com/ ExtraPutty] terminal with Flow Control option is set to None (DTR/RTS disable)driver installation'''
=== Trusted Execution Engine ===
* [http://fit-pc.com/download/fitlet2/sw/drivers/win10/fitlet2_Win10_TXE.zip Trusted Execution Engine driver]
** Driver version: 3.10.500.22221115** Upload date: 2017.102018.09.12
** MD5 checksum:
** HW revisions supported: All revisions
