Difference between revisions of "Tensor-I20 BIOS Update"
From fit-PC wiki
(Created page with "* This page contains information of how to update the Tensor-I20's firmware. '''<span style="color:#FF0000">Important:</span>'''<br /> * BIOS update recommended in case the...") (change visibility) |
(→Updating BIOS) (change visibility) |
||
Line 15: | Line 15: | ||
== Updating BIOS == | == Updating BIOS == | ||
# Connect the prepared UFD to the target Tensor-I20 and power up. | # Connect the prepared UFD to the target Tensor-I20 and power up. | ||
− | # Press the '''F7''' | + | # Press the '''F7''' during the boot until the '''Select boot device''' menu appears. |
# Select the '''UFD''' on the menu and press '''ENTER''' | # Select the '''UFD''' on the menu and press '''ENTER''' | ||
# The system will boot to the EFI Shell and after 5 seconds the automatic script will start.<br/>'''Note:''' '''<span style="color: red">Do not press ESC while the countdown.</span>''' | # The system will boot to the EFI Shell and after 5 seconds the automatic script will start.<br/>'''Note:''' '''<span style="color: red">Do not press ESC while the countdown.</span>''' | ||
# The BIOS flashing process will start | # The BIOS flashing process will start | ||
− | # Follow on screen instructions | + | # Follow on-screen instructions |
<!-- | <!-- | ||
== BIOS flashing without USB device-support == | == BIOS flashing without USB device-support == |
Revision as of 16:00, 3 July 2023
- This page contains information of how to update the Tensor-I20's firmware.
Important:
* BIOS update recommended in case the system is unstable, or required fixes have been released. * Incorrect BIOS update has a risk for system brick, therefore follow the guide step-by-step.
Preparing the USB Flash Drive with BIOS Updater
- Connect your USB Flash Drive (UFD) to your computer and format it to FAT32 file system
- Download and extract the Bios update package.
- Extract the update package to the root of the UFD
Updating BIOS
- Connect the prepared UFD to the target Tensor-I20 and power up.
- Press the F7 during the boot until the Select boot device menu appears.
- Select the UFD on the menu and press ENTER
- The system will boot to the EFI Shell and after 5 seconds the automatic script will start.
Note: Do not press ESC while the countdown. - The BIOS flashing process will start
- Follow on-screen instructions