Difference between revisions of "TEL-SERX1"
From fit-PC wiki
(→WORK IN PROGRESS!!!) (change visibility) |
|||
Line 1: | Line 1: | ||
==TEL-SERX1== | ==TEL-SERX1== | ||
− | + | ||
* Type: '''COM''' | * Type: '''COM''' | ||
* Config name: '''FHA''' | * Config name: '''FHA''' | ||
+ | * Compulab part number: '''FT.HA-SER1''' | ||
* Interface: '''USB 2.0''' | * Interface: '''USB 2.0''' | ||
* TRIP: '''2,3,4,5,6,7,7B,8,9''' | * TRIP: '''2,3,4,5,6,7,7B,8,9''' | ||
Line 16: | Line 17: | ||
* Each port supports RS232, RS485 half/full duplex and can be configured independently. | * Each port supports RS232, RS485 half/full duplex and can be configured independently. | ||
* Over 20 ports can be installed. | * Over 20 ports can be installed. | ||
− | + | <!-- | |
− | + | ===Instructions=== | |
* [https://fit-iot.com/files/mechanical/TELS/TEL-SERX1/Installation-instructions/fitlet2-TEL-SERX1-installation-instructions.pdf fitlet2 TEL-SERX1 installation instructions] | * [https://fit-iot.com/files/mechanical/TELS/TEL-SERX1/Installation-instructions/fitlet2-TEL-SERX1-installation-instructions.pdf fitlet2 TEL-SERX1 installation instructions] | ||
− | + | --> | |
===Production files=== | ===Production files=== | ||
− | + | <b><u>Schematics</u></b> | |
− | + | *[https://fit-iot.com/files/tensor-pc/TELs/FT.HA-SER1/FT.HA-SER1_V1_0_1_Schematics_8000011301.zip TEL-SERX1 Rev1.0.1 Schematic files] | |
− | + | <b><u>Assembly</u></b> | |
− | + | *[https://fit-iot.com/files/tensor-pc/TELs/FT.HA-SER1/FT.HA-SER1_V1_0_1_Assembly_drawings_8050011301.zip TEL-SERX1 Rev1.0.1 Assembly files] | |
− | + | <b><u>Layout</u></b> | |
− | + | *[https://fit-iot.com/files/tensor-pc/TELs/FT.HA-SER1/FT.HA-SER1_V1_0_1_Layout_8030011301.zip TEL-SERX1 Rev1.0.1 Layout files] | |
− | + | <b><u>Mechanical</u></b> | |
− | + | *[https://fit-iot.com/files/tensor-pc/TELs/FT.HA-SER1/FT.HA-SER1_V1_0_1_Mechanical_8010011301.zip TEL-SERX1 Rev1.0.1 Mechanical - DXF]<br> | |
− | + | <!-- | |
*3D 360<sup>0</sup> model | *3D 360<sup>0</sup> model |
Latest revision as of 13:56, 25 August 2021
TEL-SERX1
- Type: COM
- Config name: FHA
- Compulab part number: FT.HA-SER1
- Interface: USB 2.0
- TRIP: 2,3,4,5,6,7,7B,8,9
- Stacking: A, C
- Features: 1x RS232 by DB9
Specifications
- Using DB9 connector.
- Each port supports RS232, RS485 half/full duplex and can be configured independently.
- Over 20 ports can be installed.
Production files
Schematics
Assembly
Layout
Mechanical
Back to Tensor-PC TEL Modules