===Specifications===
*Unidirectional Isolation block, isolation TEL-GPIO provides Isolated per UL 1577GPIO input-output via USB CDC implementation
*GPIOs are driven by a dedicated 32bit microcontroller (ARM Cortex M0 - STM32F072CB) running open source firmware that can be upgraded
*Each GPIO can be configured as input4 I/output in softwareO GPIO on the device *Terminal block connectorExtendable up to 20 Isolated I/O GPIO.*Switch selectable GPIO power level(3.3V 3v / 5V level can be selected by 5.0v).* 2500 V rms for 1 minute per UL 1577* Unidirectional Isolation block. * Programmable GPIO input or output. * Reprogrammable MCU FW using build-in bootloader and openly available tools.* TEL-GPIO is Utilizing a DIP switchUSB2 Interface *Multiple TEL-GPIO cards can be installed in a system. Over 100 GPIO ports can be installed* Ambient Operation from –40°C to 85°C.
<!--
===Instructions===
* [https://fit-iot.com/files/mechanical/TELS/TEL-GPIO/Installation-instructions/TensorPC-TEL-GPIO-installation-instructions.pdf TensorPC TEL-GPIO installation instructions]
-->
===Production files===
*<b><u>Schematics</u></b>
**[https://fit-iot.com/files/mechanicaltensor-pc/TELSTELs/TELFT.S-GPIO/Schematics/TEL-GPIO-1_0FT.S-SchematicGPIO_V1_1_Schematics_8000134001.zip TEL-GPIO Rev1Rev 1.0 1 Schematic files]
*<b><u>Assembly</u></b>
**[https://fit-iot.com/files/tensor-pc/mechanicalTELs/TELS/TELFT.S-GPIO/Assembly/TEL-GPIO-1_0FT.S-AssemblyGPIO_V1_1_Assembly_drawings_8050134001.zip TEL-GPIO Rev1Rev 1.0 1 Assembly files]
*<b><u>Layout</u></b>
**[https://fit-iot.com/files/mechanicaltensor-pc/TELSTELs/TELFT.S-GPIO/Layout/TEL-GPIO-1_0FT.S-LayoutGPIO_V1_1_Layout_8030134001.zip TEL-GPIO Rev1Rev 1.0 1 Layout files]
*<b><u> Mechanical</u></b>
**[https://fit-iot.com/files/mechanicaltensor-pc/TELSTELs/TELFT.S-GPIO/Mechanical/TELFT.S-GPIOGPIO_V1_1_Mechanical_8010134001.DXF zip TEL-GPIO Mechanical - DXF]<br>**[https://fit-iot.com/files/mechanical/TELS/TEL-GPIO/Mechanical/TEL-GPIO.PDF TEL-GPIO Mechanical - PDF]
*3D 360<sup>0</sup> model
**[https://sketchfab.com/3d-models/TEL-GPIO-populated-e224f85861e3441eb42a39dd24f8fb3f TEL-GPIO 3D 360<sup>0</sup> model on Sketchfab]
-->
Back to [[Tensor-PC TEL Modules]]
