Changes
* Type: '''COM'''
* Config name: '''FQ'''
* Compulab part number: '''FT.Q_CAN'''
* Interface: '''COM'''
* TRIP: '''2,3,4,5,6,7,7B,8,9'''
* USB native device in Linux
* Over 10 ports can be installed
* Isolated DC 5V power
* Ambient Operation from –40°C to 85°C.
=== Electrical and environmental ===
* Isolation per [https://standardscatalog.ul.com/standards/en/standard_1577_5 UL 1577]
* Transient immunity: 30kV/uS.
* Isolated DC 5V power
* Ambient Operation from –40°C to 85°C.
=== Configuration ===
* Two Code implementations in one device switchable by a DIP Switch.
* Default [https://github.com/linklayer/cantact-fw CANable ] USB CDC implementation & [https://github.com/candle-usb/candleLight_fw candleLight] USB device implemintationimplementation.
* DIP switch for enabling/disabling on-board 120 Ohm termination
* Upgradeable using build-in MCU bootloader and openly available tools. (Please follow update guide in [https://github.com/Compulab-Tensor-PC/TEL-CANBUS/blob/master/README.md#firmware-update GitHub])
=== Open source hardware and software ===
* Complete hardware design files are available
* Complete firmware is available
* Designed for Hacking - Easily scriptable [https://python-can.readthedocs.io/en/master/ Python SW library] for easy and cross-platform communication to the device
==Block diagram==
[[File:TEL-CANBUS_Rev.1.0_block_Diagram.jpg|200px]]
==Connector Pinout==[[File:TEL-CANBUS connector pinout.png|200px]]
<!--
===Instructions===
