Changes

1. Intense PC BIOS reset(CMOS clear):::a. *Power down the PC and unplug the power cable.::b. *Open the service door (by screwing out one bolt) and remove it (with the storage).::c. *Remove the memory SO-DIMM modules.::d. *Reset the BIOS by shorting for 3 seconds two test points (TP73 and TP77) located under SO-DIMMs memory modules (with print RTC_RST).::e. *Install back the memories + the storage with the service door.::f. *Plug the power and power up the PC.  :: [[File:Intense(either auto-PC_BIOS_reseton or pressing power button).jpg]]

:: *The system will not boot without memory. 

::a. *Are you able to power up without storage?::b. *Intense PC supports up to 7200 rpm HDD drives. 

::a. *Verify the power supply is not damaged and functions properly.::b. *If you have another power supply use it to eliminate and determine the failing side.::c. *In case you use other power supply make sure it provides uninterrupted power and stable grounding.

56. [http://www.fit-pc.com/web/support/rma/ RMA procedure]