Difference between revisions of "Intense PC BIOS Update"
(3 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
[https://twitter.com/IotFit Follow us on Twitter for software and BIOS updates] | [https://twitter.com/IotFit Follow us on Twitter for software and BIOS updates] | ||
− | |||
− | |||
<!-- | <!-- | ||
== BIOS update procedure == | == BIOS update procedure == | ||
Line 11: | Line 9: | ||
# Execute me_up.nsh script | # Execute me_up.nsh script | ||
# On next boot, reset BIOS Setup settings to defaults by F9 in BIOS Setup Menu. | # On next boot, reset BIOS Setup settings to defaults by F9 in BIOS Setup Menu. | ||
+ | --> | ||
+ | ===Step-By-Step Bios Update=== | ||
− | <span style="color: red"> | + | <!--*<span style="color: red">If the machine has an older BIOS version than '''CR_2.2.0.377 X64''' Please contact Compulab's support at <u>fitpcsupport@compulab.co.il</u></span> --> |
− | + | ||
− | --> | + | |
− | + | ||
− | + | ==Prepare Boot Media== | |
− | 1. Download | + | 1. Download the latest [[Intense PC BIOS ROM files]]<br> |
2. Extract the image file from the archive.<br> | 2. Extract the image file from the archive.<br> | ||
3. Prepare bootable USB flash drive: | 3. Prepare bootable USB flash drive: | ||
Line 29: | Line 26: | ||
sudo dd if=filename.img of=/dev/sdx bs=1MB | sudo dd if=filename.img of=/dev/sdx bs=1MB | ||
− | + | ==1st boot== | |
1. Boot Intense PC or MintBox2 from the USB Flash drive.<br> | 1. Boot Intense PC or MintBox2 from the USB Flash drive.<br> | ||
Line 35: | Line 32: | ||
BIOS.bat | BIOS.bat | ||
+ | |||
+ | NOTE: On older versions the name of the batch file is - '''BIOS_UPD.bat''' | ||
* The following warnings can be ignored: [[File:BIOS_error_IPC.png|none|thumb|left|]] | * The following warnings can be ignored: [[File:BIOS_error_IPC.png|none|thumb|left|]] | ||
Line 40: | Line 39: | ||
4. Reboot the device manually after you see the message "Verifying flash... VERIFIED". | 4. Reboot the device manually after you see the message "Verifying flash... VERIFIED". | ||
− | + | ==2nd boot== | |
1. Boot Intense PC or MintBox2 from the USB Flash drive.<br> | 1. Boot Intense PC or MintBox2 from the USB Flash drive.<br> | ||
Line 64: | Line 63: | ||
# Wait until message "Please disconnect this system from power for 15 sec for completion" | # Wait until message "Please disconnect this system from power for 15 sec for completion" | ||
# Power cycle the computer. | # Power cycle the computer. | ||
− | + | ||
− | + | ||
− | + | ||
== Previous BIOS update procedure == | == Previous BIOS update procedure == |
Latest revision as of 15:24, 18 November 2018
Follow us on Twitter for software and BIOS updates
Contents
Step-By-Step Bios Update
Prepare Boot Media
1. Download the latest Intense PC BIOS ROM files
2. Extract the image file from the archive.
3. Prepare bootable USB flash drive:
- In Windows use Win32DiskImager tool
- In Linux do the following:
In order to figure out what the USB device name is, issue:
ls -all /dev/disk/by-id/
For instance, the device detected as /dev/sdx, issue:
sudo dd if=filename.img of=/dev/sdx bs=1MB
1st boot
1. Boot Intense PC or MintBox2 from the USB Flash drive.
2. As soon as the FreeDOS shows up, issue:
BIOS.bat
NOTE: On older versions the name of the batch file is - BIOS_UPD.bat
- The following warnings can be ignored:
3. Wait for it's completion without errors.
4. Reboot the device manually after you see the message "Verifying flash... VERIFIED".
2nd boot
1. Boot Intense PC or MintBox2 from the USB Flash drive.
2. As soon as the FreeDOS shows up, issue:
ME_LOCK.bat
3. Wait for it's completion without errors.
4. Wait until message "Please disconnect this system from power for 15 sec for completion"
5. Power cycle the computer.