Difference between revisions of "Intense PC (MintBox 2) security update 170523"
From fit-PC wiki
Line 3: | Line 3: | ||
# Extract the image file from the archive. | # Extract the image file from the archive. | ||
# Prepare bootable USB flash drive: | # Prepare bootable USB flash drive: | ||
− | #* Windows users | + | #* Windows users - use Win32DiskImager utility: [https://sourceforge.net/projects/win32diskimager/ Win32DiskImager] |
− | + | ||
#* Linux users: | #* Linux users: | ||
− | #** Run this command to figure out what device name was assigned to your USB flash drive | + | #** Run this command to figure out what device name was assigned to your USB flash drive: $ ls -all /dev/disk/by-id/ |
− | + | #** Assuming your USB flash drive was detected as /dev/sdx write the image on it: $ sudo dd if=''filename.img'' of=/dev/sdx bs=1MB | |
− | #** Assuming your USB flash drive was detected as /dev/sdx write the image on it | + | |
− | + | ||
# Boot Intense PC or MintBox2 from the USB Flash drive. | # Boot Intense PC or MintBox2 from the USB Flash drive. | ||
# When boots up into FreeDOS command line run ''BIOS_UPD.bat'' and wait for it's completion without errors. | # When boots up into FreeDOS command line run ''BIOS_UPD.bat'' and wait for it's completion without errors. |
Revision as of 13:46, 20 June 2017
- Download the latest Intense PC BIOS image:
- Extract the image file from the archive.
- Prepare bootable USB flash drive:
- Windows users - use Win32DiskImager utility: Win32DiskImager
- Linux users:
- Run this command to figure out what device name was assigned to your USB flash drive: $ ls -all /dev/disk/by-id/
- Assuming your USB flash drive was detected as /dev/sdx write the image on it: $ sudo dd if=filename.img of=/dev/sdx bs=1MB
- Boot Intense PC or MintBox2 from the USB Flash drive.
- When boots up into FreeDOS command line run BIOS_UPD.bat and wait for it's completion without errors.
- After it the system will boot again into FreeDOS run ME_LOCK.bat and wait for it's completion without errors.
- Wait until message "Please disconnect this system from power for 15 sec for completion"
- Power cycle the computer.