1. IPC2 BIOS reset:
::a. *Power down the PC and unplug the power cable.::b. *Open the service door (by screwing out one bolt) and remove it (with the storage).::c. *Reset the BIOS by pressing the low profile push button SW3 for 3 seconds.::d. *Install back the storage with the service door.::e. *Plug the power and power up the PC(either auto-on or pressing power button).
:: [[File:IPC2_BIOS_reset.jpg]]
2. Verify RAM memory modules are installed -
:: *The system will not boot without memory.
3. Try to answer the following questions:
::a. *Are you able to power up without storage?::b. *IPC2 supports up to 7200 rpm HDD drives.
4. Power supply:
*Verify the power supply is not damaged and functions properly.
*If you have another power supply use it to eliminate and determine the failing side.
*In case you use other power supply make sure it provides uninterrupted power and stable grounding.
4. Power supply:::a. Verify the power supply is not damaged and functions properly.::b. If you have another power supply use it to eliminate and determine the failing side.::c. In case you use other power supply make sure it provides uninterrupted power and stable grounding5.[[IPC2 BIOS Update]]
6. [http://www.fit-pc.com/web/support/rma/ RMA procedure]
5. [http[category://www.fit-pc.com/web/support/rma/ RMA procedureIPC2]]
