Difference between revisions of "IPC2 Haswell security update 170523"
From fit-PC wiki
(5 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
# Download and save the attached archive: | # Download and save the attached archive: | ||
− | #* [http://fit-pc.com/download/intense-pc2/bios/ | + | #* [http://fit-pc.com/download/intense-pc2/bios/haswell/21-05-2017/ipc2hsw_usb_3.330.5.img.zip BIOS update for IPC2 with FM-USB3 modules] |
− | #* [http://fit-pc.com/download/intense-pc2/bios/ | + | #* [http://fit-pc.com/download/intense-pc2/bios/haswell/21-05-2017/ipc2hsw_pcie_3.330.5.img.zip BIOS update for IPC2 with other FACE Modules] |
# Extract the image file from the archive. | # Extract the image file from the archive. | ||
− | + | <!-- prepare bootable USB drive --> | |
− | + | {{How to prepare bootable USB drive}} | |
# Boot IPC2 from the USB Flash. | # Boot IPC2 from the USB Flash. | ||
− | # When boots up into FreeDOS command line run: | + | # When boots up into FreeDOS command line run: ''BIOS_UPD.bat'' and wait for it's completion without errors. |
− | # Wait until message " | + | # After the system will boot again into FreeDOS command line run: ''ME_LOCK.bat'' and wait for it's completion without errors. |
+ | # Wait until message "Please disconnect this system from power for 15 sec for completion". | ||
# Power cycle the computer. | # Power cycle the computer. | ||
Latest revision as of 14:04, 20 June 2017
- Download and save the attached archive:
- Extract the image file from the archive.
- Prepare bootable USB flash drive:
- Windows users - use Win32DiskImager utility: Win32DiskImager
- Linux users:
- Run this command to figure out what device name was assigned to the USB drive: $ ls -all /dev/disk/by-id/
- Assuming the USB drive was detected as /dev/sdx write the image on it by typing: $ sudo dd if=filename.img of=/dev/sdx bs=1MB
- Boot IPC2 from the USB Flash.
- When boots up into FreeDOS command line run: BIOS_UPD.bat and wait for it's completion without errors.
- After the system will boot again into FreeDOS command line run: ME_LOCK.bat and wait for it's completion without errors.
- Wait until message "Please disconnect this system from power for 15 sec for completion".
- Power cycle the computer.