Difference between revisions of "IPC2 Haswell BIOS update"
From fit-PC wiki
(→BIOS update procedure) (change visibility) |
|||
(7 intermediate revisions by one other user not shown) | |||
Line 1: | Line 1: | ||
The following procedure suitable IPC2 computers equipped with Intel Core gen 4 (Haswell) processors.<br> | The following procedure suitable IPC2 computers equipped with Intel Core gen 4 (Haswell) processors.<br> | ||
− | Suitable for all OS: Windows 7/8, Linux in non-UEFI mode | + | Suitable for all OS: Windows 7/8, Linux in non-UEFI mode. |
− | ==BIOS update procedure== | + | == BIOS update procedure == |
+ | # Download the latest [[IPC2 BIOS ROM files | IPC2 Haswell BIOS ROM files]] | ||
+ | # Extract archive content to root of USB Flash formatted FAT32. | ||
+ | # Insert USB flash into IPC2 HSW and power it on. | ||
+ | # Boot IPC2 HSW into "Internal Shell" ("UEFI Boot" should be enabled in Boot Features menu of BIOS Setup) press F5 during boot. | ||
+ | # Update will start automatically, follow instructions on the screen. | ||
+ | |||
+ | ===Old BIOS versions update procedure=== | ||
+ | <div class="toccolours mw-collapsible mw-collapsed" overflow:auto;"> | ||
+ | <!-- | ||
+ | # Extract the image file from the archive. | ||
+ | <!-- prepare bootable USB drive --> | ||
+ | {{How to prepare bootable USB drive}} | ||
+ | # Boot IPC2 from the USB Flash. | ||
+ | # When boots up into FreeDOS command line run: ''BIOS_UPD.bat'' and wait for it's completion without errors. | ||
+ | # After the system will boot again into FreeDOS command line run: ''ME_LOCK.bat'' and wait for it's completion without errors. | ||
+ | # Wait until message "Please disconnect this system from power for 15 sec for completion". | ||
+ | # Power cycle the computer. | ||
+ | </div> | ||
+ | [[category:IPC2]] | ||
+ | [[Category:BIOS]] | ||
+ | |||
+ | |||
+ | <!-- | ||
+ | == Previous BIOS update procedure== | ||
1. Prepare bootable USB DOS image | 1. Prepare bootable USB DOS image | ||
Line 21: | Line 45: | ||
5. Run BIOS.bat and wait until completion (system will reboot and flash BIOS)<br> | 5. Run BIOS.bat and wait until completion (system will reboot and flash BIOS)<br> | ||
6. After compilation remove USB disk , remove power and do regular boot<br> | 6. After compilation remove USB disk , remove power and do regular boot<br> | ||
+ | --> |
Latest revision as of 08:49, 3 September 2018
The following procedure suitable IPC2 computers equipped with Intel Core gen 4 (Haswell) processors.
Suitable for all OS: Windows 7/8, Linux in non-UEFI mode.
BIOS update procedure
- Download the latest IPC2 Haswell BIOS ROM files
- Extract archive content to root of USB Flash formatted FAT32.
- Insert USB flash into IPC2 HSW and power it on.
- Boot IPC2 HSW into "Internal Shell" ("UEFI Boot" should be enabled in Boot Features menu of BIOS Setup) press F5 during boot.
- Update will start automatically, follow instructions on the screen.
Old BIOS versions update procedure
- Prepare bootable USB flash drive:
- Windows users - use Win32DiskImager utility: Win32DiskImager
- Linux users:
- Run this command to figure out what device name was assigned to the USB drive: $ ls -all /dev/disk/by-id/
- Assuming the USB drive was detected as /dev/sdx write the image on it by typing: $ sudo dd if=filename.img of=/dev/sdx bs=1MB
- Boot IPC2 from the USB Flash.
- When boots up into FreeDOS command line run: BIOS_UPD.bat and wait for it's completion without errors.
- After the system will boot again into FreeDOS command line run: ME_LOCK.bat and wait for it's completion without errors.
- Wait until message "Please disconnect this system from power for 15 sec for completion".
- Power cycle the computer.