Difference between revisions of "IPC2 Haswell BIOS update"
From fit-PC wiki
Line 5: | Line 5: | ||
# Download the latest [[IPC2 BIOS ROM files | IPC2 Haswell BIOS ROM files]] | # Download the latest [[IPC2 BIOS ROM files | IPC2 Haswell BIOS ROM files]] | ||
# Extract the image file from the archive. | # Extract the image file from the archive. | ||
− | {{How to prepare bootable USB drive}} | + | <!-- prepare bootable USB drive --> |
+ | {{How to prepare bootable USB drive}} | ||
# Boot IPC2 from the USB Flash. | # Boot IPC2 from the USB Flash. | ||
# When boots up into FreeDOS command line run: ''BIOS_UPD.bat'' and wait for it's completion without errors. | # When boots up into FreeDOS command line run: ''BIOS_UPD.bat'' and wait for it's completion without errors. |
Revision as of 14:00, 20 June 2017
The following procedure suitable IPC2 computers equipped with Intel Core gen 4 (Haswell) processors.
Suitable for all OS: Windows 7/8, Linux in non-UEFI mode.
BIOS update procedure
- Download the latest IPC2 Haswell BIOS ROM files
- Extract the image file from the archive.
- Prepare bootable USB flash drive:
- Windows users - use Win32DiskImager utility: Win32DiskImager
- Linux users:
- Run this command to figure out what device name was assigned to the USB drive: $ ls -all /dev/disk/by-id/
- Assuming the USB drive was detected as /dev/sdx write the image on it by typing: $ sudo dd if=filename.img of=/dev/sdx bs=1MB
- Boot IPC2 from the USB Flash.
- When boots up into FreeDOS command line run: BIOS_UPD.bat and wait for it's completion without errors.
- After the system will boot again into FreeDOS command line run: ME_LOCK.bat and wait for it's completion without errors.
- Wait until message "Please disconnect this system from power for 15 sec for completion".
- Power cycle the computer.