Changes
/* IPC2ERR002: LAN1 (I218) Ethernet OS detection issue */
== IPC2ERR001: LAN1 (I218 ) Ethernet FW speed ==
* '''Date''': 8-Dec-2015
* '''Symptom''': LAN1 (I218) operates at 10 Mbps instead of 1000 Mbps
* '''Applies to''': Applies to products produced between 12 Nov, 2015 - 10 Dec, 2015. [httphttps://fit-pcdocs.google.com/downloadspreadsheets/intensed/1VgIJHgEf-pc2dqfLlsAL6bAp5P2mXXUrXf_MVCtt2kdFgo/bios/Fixes/10mbps-enclosed.xlsx edit#gid=0 List of IPC2 computers with respective SN requires to apply the fix]
* '''Cause''': Data corruption during production programming phase
* '''Fix''': [[Contact manufacturer == IPC2ERR002: LAN1 (I218 ) Ethernet FW speed fixOS detection issue ==* '''Date''': 17-May-2017* '''Symptom''': LAN1 (I218) is not detected by the OS if computer is rebooted with unplugged port* '''Applies to''': Applies to ''IPC2 Broadwell'' computers that shows such behavior. * '''Cause''': IPC2 Broadwell doesn't implement Ultra Low Power mode (Connected Standby).* '''Fix''': Install update I218 driver by installing PROWin (22.3) suite for your OS with connected LAN cable.** Windows 10 driver: [https://downloadcenter.intel.com/download/25016/ Intel® Network Adapter Driver for Windows® 10*]** Windows 7 driver: [https://downloadcenter.intel.com/download/18713/ Intel® Network Adapter Driver for Windows 7*]** After installation go to I218 driver properties - "Power Management" tab and uncheck "Ultra Low Power Mode when cable is disconnected" option in "Power Saver Options" list.** The procedure required after each driver reinstall.
[[category:IPC2]]
[[category:errata notes]]
