Changes
The following procedure suitable IPC2 computers equipped with Intel Core gen 5 (Broadwell) processors.<br>
==BIOS Update procedure==
# Download the latest [[IPC2 Broadwell BIOS ROM files]]
# Extract the the files from the archive to USB Flash formatted FAT32.
# Boot IPC into Internal Shell ("UEFI Boot" should be enabled in Boot Features menu of BIOS Setup) press F5 during boot.
# Please follow appeared update options in UEFI Shel (process BIOS update before ME update).
# Execute update.nsh script
# Execute me_up.nsh script
# On next boot, reset BIOS Setup settings to defaults by F9 in BIOS Setup Menu.
===Old BIOS versions update procedure===
<div class="toccolours mw-collapsible mw-collapsed" overflow:auto;">
== BIOS update procedure ==
# Download the latest [[IPC2 Broadwell BIOS ROM files]]
# Extract the image file from the archive.
<!-- prepare bootable USB drive -->
{{How to prepare bootable USB drive}}
# Boot IPC2 from the USB Flash.
# When boots up into FreeDOS command line run: ''BIOS_UPD.bat'' and wait for it's completion without errors.
# After the system will boot again into FreeDOS command line run: ''ME_LOCK.bat'' and wait for it's completion without errors.
# Wait until message "Please disconnect this system from power for 15 sec for completion".
# Power cycle the computer.
</div>
[[category:IPC2]]
[[Category:BIOS]]
<!--
==BIOS update procedure==
1. Download the latest image with [[IPC2 Broadwell BIOS ROM files]]<br>
2. Extract the image file from archive.<br>
3. Prepare bootable USB image:<br>
* Use Win32DiskImager utility for Windows: [https://sourceforge.net/projects/win32diskimager/ Win32DiskImager]<br>
4. Boot IPC2 Broadwell from the USB Flash.<br>
5. When boots up into FreeDOS command line, run one of the two options (based on FACE Module connected):
* a. ''upd_usb.bat'' for systems with FM-USB3 face module and wait for it's completion.<br>
* b. ''upd_lan.bat'' for systems with other face modules and wait for it's completion.<br>
6. Wait until message "Disconnect power connector for 15 sec and connect it again".<br>
7. Power cycle the IPC2.<br>
Note: "UEFI Boot", "CSM Support" and "Legacy Boot" options should be Enabled in BIOS setup: Main -> Boot Features
-->
<!--
== old procedure ==
1. Prepare bootable USB image:<br>
* Use Win32DiskImager utility for Windows: [https://sourceforge.net/projects/win32diskimager/ Win32DiskImager]
3. Extract and write attached image on the USB Flash ( > 512MB) by Win32DiskImager utility.<br>
4. Insert USB flash into IPC2 Broadwell and power it on.<br>
5. Boot into Internal EFI Shell (press F5 during the BIOS boot).<br>
6. Switch to USB flash file system.<br>
7. Run update.nsh script<br>
