==BIOS update procedure==The following procedure true under Windows 7 and Linux in non-UEFI mode operating systems [https://twitter.com/IotFit Follow us on Twitter for software and BIOS updates]
#Connect at least one display via HDMI port=== BIOS update instructions ===#Prepare FAT formatted USB Disk-on-key#Download the latest * [[IPC2 Haswell BIOS ROM filesupdate]]#Unzip and copy 3 files to the root directory:#*[[IPC2.cap#*startup.nsh#*ShellFlash64.efi#Insert the USB flash drive and ensure no other boot-able USB devices connected#Power on IPC2, enter BIOS by pressing F2. Go to "Boot Features" and set "Legacy Boot" to "Disable"#Check on the "Boot" tab that inserted USB listed as first boot device, otherwise change the boot order accordingly#Go to "Exit" and press "Exit Saving Changes"#IPC2 will restart and Broadwell BIOS update will take place]]#Wait for "BIOS is updated successfully. Press any key to continue ..." message#Remove USB disk and press ENTER#System may do several power cycles and then boot normally#Configure the settings of the new BIOS according to your needs* [[Security updates]]
=== Links ===
* [[IPC2: Software | IPC2 Software Repository]]
* [[IPC2 BIOS guide]]
'''Important notes'''[[category: IPC2]]*In case of errors, it may be needed to remove all storage devices and perform the programming process with USB flash drive only.*Under Windows 8 and Linux in UEFI mode operating systems other procedure should be followed.*[[Category:BIOS update resets any previous display configurations, setting HDMI ports as default outputs. If a display connected via DisplayPort interface, it resets and screen will go black.]]
