Changes

# 1. Install the [http://fit-iot.com/files/download/intense-pc2/sw/drivers/win7/IPC2_BDW_Win7_Chipset.zip Chipset driver] before the USB3.0 driver# 2. Download the [http://fit-iot.com/files/download/intense-pc2/sw/drivers/win7/IPC2_BDW_Win7_USB30.zip USB3.0 driver]# 3. Extract the downloaded package# 4. Run the '''OfflineSetup32.exe''' file for Windows 7 32bit or the '''OfflineSetup64.exe''' file for Windows 7 64bit# 5. Follow the on-screen instructions# 6. At the the end of installation process, reset the unit# 7. Enter the BIOS menu by pressing the '''[F2]''' key during boot# Browse to 8. In the BIOS menu browse as follows: >Advanced - >> South Bridge Configuration - > >'''SB USB Config''' Menu. *set the '''xHCI Mode''' setting to '''[Enabled]'''# 9. Press the '''[F10]''' key for Save&Exit# 10. When Windows bootd boots up, open the downloaded package# 11. Run the '''Setup.exe''' file# 12. Follow the on-screen instructions# 13. At the the end of installation process, reset the unit