Difference between revisions of "How to install FreeBSD on fitlet2"
From fit-PC wiki
Line 9: | Line 9: | ||
3. Necessary BIOS settings changes | 3. Necessary BIOS settings changes | ||
− | ::Press [DEL] during boot to enter BIOS settings: | + | ::Press [DEL] during boot to enter BIOS settings and set the following to: |
− | + | Chipset -> South Cluster Configuration -> SCC Configuration -> SCC SD Card Support '''[Disabled]''' | |
− | + | Chipset -> South Cluster Configuration -> SCC Configuration -> SCC eMMC Support '''[Disabled]''' | |
− | + | Chipset -> South Cluster Configuration -> SCC Configuration -> SCC SDIO Support '''[Disabled]''' | |
− | + | ||
− | + | ||
4. Power on the fitlet2, you will see boot process and "Welcome to FreeBSD!" message. | 4. Power on the fitlet2, you will see boot process and "Welcome to FreeBSD!" message. |
Latest revision as of 13:20, 4 November 2018
1. Download the FreeBSD release from https://www.freebsd.org
$ wget https://download.freebsd.org/ftp/releases/amd64/amd64/ISO-IMAGES/11.1/FreeBSD-11.1-RELEASE-amd64-memstick.img
2. Prepare bootable disk-on-key (assuming /dev/sdX is your disk-on-key):
$ sudo dd if=FreeBSD-11.1-RELEASE-amd64-memstick.img of=/dev/sdX bs=1MB
3. Necessary BIOS settings changes
- Press [DEL] during boot to enter BIOS settings and set the following to:
Chipset -> South Cluster Configuration -> SCC Configuration -> SCC SD Card Support [Disabled] Chipset -> South Cluster Configuration -> SCC Configuration -> SCC eMMC Support [Disabled] Chipset -> South Cluster Configuration -> SCC Configuration -> SCC SDIO Support [Disabled]
4. Power on the fitlet2, you will see boot process and "Welcome to FreeBSD!" message.