Difference between revisions of "How to install FreeBSD on fitlet2"
From fit-PC wiki
(Created page with "#. Download the FreeBSD release from https://www.freebsd.org $ wget https://download.freebsd.org/ftp/releases/amd64/amd64/ISO-IMAGES/11.1/FreeBSD-11.1-RELEASE-amd64-memst...") (change visibility) |
|||
Line 1: | Line 1: | ||
− | # | + | # Download the FreeBSD release from https://www.freebsd.org |
$ wget https://download.freebsd.org/ftp/releases/amd64/amd64/ISO-IMAGES/11.1/FreeBSD-11.1-RELEASE-amd64-memstick.img | $ wget https://download.freebsd.org/ftp/releases/amd64/amd64/ISO-IMAGES/11.1/FreeBSD-11.1-RELEASE-amd64-memstick.img | ||
− | # | + | # Prepare bootable disk-on-key (assuming /dev/sdX is your disk-on-key): |
$ sudo dd if=FreeBSD-11.1-RELEASE-amd64-memstick.img of=/dev/sdX bs=1MB | $ sudo dd if=FreeBSD-11.1-RELEASE-amd64-memstick.img of=/dev/sdX bs=1MB | ||
− | # | + | # Necessary BIOS settings changes: |
:Press [Del] during boot to enter BIOS settings: | :Press [Del] during boot to enter BIOS settings: | ||
Line 17: | Line 17: | ||
Set Chipset -> SCC Configuration -> SCC SDIO Support (D30: F0) to [Disable] | Set Chipset -> SCC Configuration -> SCC SDIO Support (D30: F0) to [Disable] | ||
− | # | + | # Power on the fitlet2, you will see boot process and "Welcome to FreeBSD!" message. |
Revision as of 06:46, 15 April 2018
- Download the FreeBSD release from https://www.freebsd.org
$ wget https://download.freebsd.org/ftp/releases/amd64/amd64/ISO-IMAGES/11.1/FreeBSD-11.1-RELEASE-amd64-memstick.img
- Prepare bootable disk-on-key (assuming /dev/sdX is your disk-on-key):
$ sudo dd if=FreeBSD-11.1-RELEASE-amd64-memstick.img of=/dev/sdX bs=1MB
- Necessary BIOS settings changes:
- Press [Del] during boot to enter BIOS settings:
Set Chipset -> OS Selection to [Intel Linux] Set Chipset -> SCC Configuration -> SCC SD Card Support (D27: F0) to [Disable] Set Chipset -> SCC Configuration -> SCC eMMC Support (D28: F0) to [Disable] Set Chipset -> SCC Configuration -> SCC UFS Support (D29: F0) to [Disable] Set Chipset -> SCC Configuration -> SCC SDIO Support (D30: F0) to [Disable]
- Power on the fitlet2, you will see boot process and "Welcome to FreeBSD!" message.