Fitlet mSATA Heatplate Assembly

From fit-PC wiki
Revision as of 11:37, 3 November 2015 by Maxim (Talk | contribs) (Created page with "== mSATA heat-plate assembly instructions == Follow the steps shown below in order to attach the mSATA heat plate to the mSATA SSD itself. File:MSATA heatplate assembly 1.j...")

(change visibility) (diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

mSATA heat-plate assembly instructions

Follow the steps shown below in order to attach the mSATA heat plate to the mSATA SSD itself.

mSATA SSD attached to heat-plate:
1. mSATA SSD attached to heat-plate with a screw
2. Make sure that SATA controller face the heat-plate
3. Do not over-tighten the screw
Inside fitlet mSATA slot
Tighten mSATA to onboard stand-off with M2 screw
Back-panel assembly
Retrieved from "https://fit-pc.com/wiki/index.php?title=Fitlet_mSATA_Heatplate_Assembly&oldid=3331"