Changes
/* USB Settings */
* '''USB Mass Storage Driver Support''': Enable or Disable USB mass storage driver support.
* '''Port 60/64 Emulation''': Enable I/O port 60h/64h emulation support. This option should be enabled for the complete USB keyboard legacy support for non-USB aware operating systems.
* '''USB transfer timeout''': TBD Timeout value for control, bulk and interrupt transfers - 1 sec, 5 sec, 10 sec or 20 sec.* '''Device reset timeout''': TBD USB mass storage device start unit command time-out.* '''Device power-up delay''': TBDMaximum time the device will take before it properly reports itself to the Host Controller.** Auto - uses default value: for a root port it is 100 ms, for a hub port the delay is taken from the hub descriptor.
=== Boot ===
